45 lines
2.1 KiB
Plaintext
Executable File
45 lines
2.1 KiB
Plaintext
Executable File
# This is the sample uEnv.txt file for HiFive Unleashed U-boot
|
|
# The current convention (SUBJECT TO CHANGE) is that this file
|
|
# will be loaded from the first MSDOS(fat) GPT partition on the
|
|
# MMC card.
|
|
|
|
# for debugging boot
|
|
#bootargs=video=640x480 console=ttySI0 root=/dev/mmcblk0p2 rootwait
|
|
bootargs=earlyprintk console=ttyS0,115200 debug rootwait stmmaceth=chain_mode:1 root=/dev/mmcblk0p3
|
|
|
|
|
|
# The FIT file to boot from
|
|
fitfile=hifiveu.fit
|
|
|
|
# The rest of this is mostly of interest to u-boot developers
|
|
# below much match what's in FIT (ugha)
|
|
bbladdr=80700000
|
|
fdtaddr=86000000
|
|
irdaddr=86100000
|
|
irdsize=06400000
|
|
|
|
# Use the FDT in the FIT image..
|
|
#setupfdt1=fdt addr ${fdtaddr}; fdt resize; fdt chosen; fdt move ${fdtaddr} ${newfdt}
|
|
|
|
#use FDT that came with uboot
|
|
#setupfdt1=fdt addr ${newfdt}; fdt resize; fdt chosen; fdt move ${fdtaddr} ${newfdt}
|
|
|
|
#Use fit image, but don't call fdt move (TODO: understand later)
|
|
#setupfdt1=fdt addr ${newfdt}; fdt resize; fdt chosen
|
|
setupfdt1=fdt addr ${fdtaddr}
|
|
|
|
setupird=setexpr irdend ${irdaddr} + ${irdsize}; fdt set /chosen linux,initrd-start <0x0 0x${irdaddr}>; fdt set /chosen linux,initrd-end <0x0 0x${irdend}>
|
|
|
|
#setupfdt2=fdt set /chosen bootargs ${bootargs}; fdt print /chosen
|
|
#setupfdt2=fdt print /chosen; fdt set /chosen bootargs "${bootargs}"; fdt set /firmware uboot,ver ${ver}; fdt print /chosen
|
|
setupfdt2=fdt print /chosen; fdt set /chosen bootargs "${bootargs}"; fdt print /chosen
|
|
|
|
bootwait=setenv _delay ${bootdelay}; echo ${_delay}; while test ${_delay} > 0; do sleep 1; setexpr _delay ${_delay} - 1; echo ${_delay}; done
|
|
|
|
# this assumes ${fileaddr} is already set!!
|
|
#boot2=fatload mmc 0:1 ${fileaddr} ${fitfile}; bootm start ${fileaddr}; run setupfdt1; run setupchosen; run setupfdt2; bootm loados ${fileaddr}; echo "Booting kernel in"; run bootwait; go 80000000
|
|
boot2=fatload mmc 0:1 ${fileaddr} ${fitfile}; bootm start ${fileaddr}; run setupfdt1;run setupird;run setupfdt2; bootm loados ${fileaddr}; echo "Booting kernel in"; go ${bbladdr} ${fdtaddr}
|
|
|
|
# if you want to network boot, for testing, uncomment the following:
|
|
#boot2=dhcp; env import -t ${fileaddr} ${filesize}; run boot2
|