initial buildroot for linux 5.15

package/wpa_supplicant/Config.in

@@ -0,0 +1,162 @@
+menuconfig BR2_PACKAGE_WPA_SUPPLICANT
+	bool "wpa_supplicant"
+	depends on BR2_USE_MMU # fork()
+	select BR2_PACKAGE_LIBOPENSSL_ENABLE_DES if BR2_PACKAGE_LIBOPENSSL
+	select BR2_PACKAGE_LIBOPENSSL_ENABLE_MD4 if BR2_PACKAGE_LIBOPENSSL
+	help
+	  WPA supplicant for secure wireless networks
+
+	  http://w1.fi/wpa_supplicant/
+
+if BR2_PACKAGE_WPA_SUPPLICANT
+
+config BR2_PACKAGE_WPA_SUPPLICANT_NL80211
+	bool "Enable nl80211 support"
+	default y
+	depends on BR2_TOOLCHAIN_HAS_THREADS # libnl
+	select BR2_PACKAGE_LIBNL
+	help
+	  Enable support for nl80211.  This is the current wireless
+	  API for Linux, supported by all wireless drivers in vanilla
+	  Linux, but may not be supported by some out-of-tree Linux
+	  wireless drivers.  wpa_supplicant will still fall back to
+	  using the Wireless Extensions (wext) API with these drivers.
+
+	  If this option is disabled, then only the deprecated wext
+	  API will be supported, with far less features.  Linux may
+	  supports using wext with modern drivers using a
+	  compatibility layer, but it must be enabled in the kernel
+	  configuration.
+
+comment "nl80211 support needs a toolchain w/ threads"
+	depends on !BR2_TOOLCHAIN_HAS_THREADS
+
+config BR2_PACKAGE_WPA_SUPPLICANT_WEXT
+	bool "Enable wext (deprecated)"
+	default y if !BR2_TOOLCHAIN_HAS_THREADS
+	help
+	  Enable support for wext.  This is the historic wireless API
+	  for Linux, which is now deprecated and in maintenance-only in
+	  the kernel.  It may still be required by out-of-tree drivers.
+
+config BR2_PACKAGE_WPA_SUPPLICANT_WIRED
+	bool "Enable wired support"
+	select BR2_PACKAGE_WPA_SUPPLICANT_EAP
+	help
+	  Include the "wired" driver, so the internal IEEE 802.1x
+	  supplicant can be used with Ethernet.  This also enables
+	  support for MACSEC.
+
+comment "wpa_supplicant will be useless without at least one driver"
+	depends on !BR2_PACKAGE_WPA_SUPPLICANT_NL80211 && \
+		!BR2_PACKAGE_WPA_SUPPLICANT_WEXT && \
+		!BR2_PACKAGE_WPA_SUPPLICANT_WIRED
+
+config BR2_PACKAGE_WPA_SUPPLICANT_IBSS_RSN
+	bool "Enable IBSS RSN"
+	depends on BR2_PACKAGE_WPA_SUPPLICANT_NL80211
+	help
+	  Enable support for RSN/WPA2 in Ad-Hoc mode.
+
+config BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT
+	bool "Enable AP mode"
+	depends on BR2_PACKAGE_WPA_SUPPLICANT_NL80211
+	help
+	  With this option enabled, wpa_supplicant can act as an
+	  access point much like hostapd does with a limited feature
+	  set.  This links in parts of hostapd functionality into
+	  wpa_supplicant, making it bigger but dispensing the need for
+	  a separate hostapd binary in some applications hence being
+	  smaller overall.  It also enables support for Wi-Fi Direct.
+
+config BR2_PACKAGE_WPA_SUPPLICANT_WIFI_DISPLAY
+	bool "Enable Wi-Fi Display"
+	depends on BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT
+	help
+	  Enable support for Wi-Fi Display
+
+config BR2_PACKAGE_WPA_SUPPLICANT_MESH_NETWORKING
+	bool "Enable mesh networking"
+	depends on BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT
+	select BR2_PACKAGE_OPENSSL
+	select BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL
+	help
+	  Enable support for open and secured mesh networking
+	  (IEEE 802.11s)
+
+config BR2_PACKAGE_WPA_SUPPLICANT_AUTOSCAN
+	bool "Enable autoscan"
+	help
+	  Enable support for the autoscan feature (allow periodic scan)
+
+config BR2_PACKAGE_WPA_SUPPLICANT_EAP
+	bool "Enable EAP"
+	help
+	  Enable support for EAP, 802.1x/WPA-Enterprise and FILS.
+
+config BR2_PACKAGE_WPA_SUPPLICANT_HOTSPOT
+	bool "Enable HS20"
+	select BR2_PACKAGE_WPA_SUPPLICANT_EAP
+	help
+	  Enable Hotspot 2.0 and IEEE 802.11u interworking
+	  functionality.
+
+config BR2_PACKAGE_WPA_SUPPLICANT_DEBUG_SYSLOG
+	bool "Enable syslog support"
+	help
+	  Enable support for sending debug messages to syslog.
+
+config BR2_PACKAGE_WPA_SUPPLICANT_WPS
+	bool "Enable WPS"
+	help
+	  Enable support for Wi-Fi Protected Setup (WPS).
+
+config BR2_PACKAGE_WPA_SUPPLICANT_WPA3
+	bool "Enable WPA3 support"
+	select BR2_PACKAGE_OPENSSL
+	select BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL
+	help
+	  Enable WPA3 support including OWE, SAE, DPP
+
+config BR2_PACKAGE_WPA_SUPPLICANT_CLI
+	bool "Install wpa_cli binary"
+	select BR2_PACKAGE_WPA_SUPPLICANT_CTRL_IFACE
+	help
+	  Install wpa_cli command line utility
+
+config BR2_PACKAGE_WPA_SUPPLICANT_WPA_CLIENT_SO
+	bool "Install wpa_client shared library"
+	depends on !BR2_STATIC_LIBS
+	help
+	  Install libwpa_client.so.
+
+comment "wpa_client library needs a toolchain w/ dynamic library"
+	depends on BR2_STATIC_LIBS
+
+config BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE
+	bool "Install wpa_passphrase binary"
+	help
+	  Install wpa_passphrase command line utility.
+
+config BR2_PACKAGE_WPA_SUPPLICANT_CTRL_IFACE
+	bool "Enable the Unix-socket control interface"
+	help
+	  Enable support for the Unix-socket-based API.
+
+config BR2_PACKAGE_WPA_SUPPLICANT_DBUS
+	bool "Enable support for the DBus control interface"
+	depends on BR2_TOOLCHAIN_HAS_THREADS # dbus
+	select BR2_PACKAGE_DBUS
+	help
+	  Enable support for the DBus control interface.
+
+comment "dbus support needs a toolchain w/ threads"
+	depends on !BR2_TOOLCHAIN_HAS_THREADS
+
+config BR2_PACKAGE_WPA_SUPPLICANT_DBUS_INTROSPECTION
+	bool "Introspection support"
+	depends on BR2_PACKAGE_WPA_SUPPLICANT_DBUS
+	help
+	  Add introspection support for the DBus control interface.
+
+endif