initial buildroot for linux 5.15
This commit is contained in:
Huan.Feng
@@ -0,0 +1,124 @@
|
||||
config BR2_TARGET_EDK2_ARCH_SUPPORTS
|
||||
bool
|
||||
default y if BR2_aarch64
|
||||
default y if BR2_i386
|
||||
default y if BR2_x86_64
|
||||
|
||||
config BR2_TARGET_EDK2
|
||||
bool "EDK2"
|
||||
depends on BR2_TARGET_EDK2_ARCH_SUPPORTS
|
||||
depends on BR2_TOOLCHAIN_GCC_AT_LEAST_5
|
||||
select BR2_PACKAGE_EDK2_PLATFORMS
|
||||
help
|
||||
EDK II is a modern, feature-rich, cross-platform firmware
|
||||
development environment for the UEFI and PI specifications.
|
||||
|
||||
https://github.com/tianocore/tianocore.github.io/wiki/EDK-II
|
||||
|
||||
if BR2_TARGET_EDK2
|
||||
|
||||
choice
|
||||
prompt "Platform"
|
||||
default BR2_TARGET_EDK2_PLATFORM_OVMF_I386 if BR2_i386
|
||||
default BR2_TARGET_EDK2_PLATFORM_OVMF_X64 if BR2_x86_64
|
||||
default BR2_TARGET_EDK2_PLATFORM_ARM_VIRT_QEMU if BR2_aarch64
|
||||
|
||||
config BR2_TARGET_EDK2_PLATFORM_OVMF_I386
|
||||
bool "i386"
|
||||
depends on BR2_i386 || BR2_x86_64
|
||||
help
|
||||
Platform configuration for a generic i386 target.
|
||||
This platform will boot from flash address 0x0.
|
||||
It should therefore be used as the first bootloader.
|
||||
|
||||
config BR2_TARGET_EDK2_PLATFORM_OVMF_X64
|
||||
bool "x86-64"
|
||||
depends on BR2_x86_64
|
||||
help
|
||||
Platform configuration for a generic x86-64 target.
|
||||
This platform will boot from flash address 0x0.
|
||||
It should therefore be used as the first bootloader.
|
||||
|
||||
config BR2_TARGET_EDK2_PLATFORM_ARM_VIRT_QEMU
|
||||
bool "ARM Virt Qemu (flash)"
|
||||
depends on BR2_aarch64
|
||||
help
|
||||
Platform configuration for QEMU targeting the Virt machine.
|
||||
This platform will only boot from flash address 0x0.
|
||||
It should therefore be used as the first bootloader.
|
||||
|
||||
config BR2_TARGET_EDK2_PLATFORM_ARM_VIRT_QEMU_KERNEL
|
||||
bool "ARM Virt Qemu (kernel)"
|
||||
depends on BR2_aarch64
|
||||
help
|
||||
Platform configuration for QEMU targeting the Virt machine.
|
||||
This platform can boot from either flash address 0x0 or via
|
||||
the Linux boot protocol. It can therefore be loaded by a
|
||||
previous bootloader like ARM Trusted Firmware or OP-TEE.
|
||||
|
||||
config BR2_TARGET_EDK2_PLATFORM_ARM_SGI575
|
||||
bool "ARM SGI-575"
|
||||
depends on BR2_aarch64
|
||||
help
|
||||
Platform configuration for ARM SGI-575 on ARM's
|
||||
Fixed Virtual Platform (FVP).
|
||||
|
||||
config BR2_TARGET_EDK2_PLATFORM_ARM_VEXPRESS_FVP_AARCH64
|
||||
bool "ARM VExpress FVP Aarch64"
|
||||
depends on BR2_aarch64
|
||||
help
|
||||
Platform configuration for ARM Versatile Express targeting
|
||||
the Aarch64 Fixed Virtual Platform (FVP).
|
||||
|
||||
config BR2_TARGET_EDK2_PLATFORM_SOCIONEXT_DEVELOPERBOX
|
||||
bool "Socionext DeveloperBox"
|
||||
depends on BR2_aarch64
|
||||
depends on BR2_TARGET_ARM_TRUSTED_FIRMWARE
|
||||
depends on !BR2_TARGET_ARM_TRUSTED_FIRMWARE_EDK2_AS_BL33
|
||||
select BR2_PACKAGE_HOST_DTC
|
||||
select BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP
|
||||
help
|
||||
Platform configuration for Socionext SynQuacer DeveloperBox
|
||||
(SC2A11).
|
||||
|
||||
comment "Socionext DeveloperBox depends on ATF not using EDK2 as BL33"
|
||||
depends on BR2_TARGET_ARM_TRUSTED_FIRMWARE_EDK2_AS_BL33
|
||||
|
||||
config BR2_TARGET_EDK2_PLATFORM_SOLIDRUN_ARMADA80X0MCBIN
|
||||
bool "SolidRun MacchiatoBin"
|
||||
depends on BR2_aarch64
|
||||
depends on BR2_TARGET_ARM_TRUSTED_FIRMWARE
|
||||
select BR2_PACKAGE_HOST_DTC
|
||||
select BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP
|
||||
help
|
||||
Platform configuration for the SolidRun MacchiatoBin.
|
||||
|
||||
config BR2_TARGET_EDK2_PLATFORM_QEMU_SBSA
|
||||
bool "QEMU SBSA"
|
||||
depends on BR2_aarch64
|
||||
depends on BR2_TARGET_ARM_TRUSTED_FIRMWARE
|
||||
depends on !BR2_TARGET_ARM_TRUSTED_FIRMWARE_EDK2_AS_BL33
|
||||
help
|
||||
Platform configuration for QEMU targeting the SBSA reference
|
||||
machine.
|
||||
|
||||
comment "QEMU SBSA depends on ATF not using EDK2 as BL33"
|
||||
depends on BR2_TARGET_ARM_TRUSTED_FIRMWARE_EDK2_AS_BL33
|
||||
|
||||
endchoice
|
||||
|
||||
config BR2_TARGET_EDK2_FD_NAME
|
||||
string
|
||||
default "OVMF" if BR2_TARGET_EDK2_PLATFORM_OVMF_I386
|
||||
default "OVMF" if BR2_TARGET_EDK2_PLATFORM_OVMF_X64
|
||||
default "QEMU_EFI" if BR2_TARGET_EDK2_PLATFORM_ARM_VIRT_QEMU
|
||||
default "QEMU_EFI" if BR2_TARGET_EDK2_PLATFORM_ARM_VIRT_QEMU_KERNEL
|
||||
default "BL33_AP_UEFI" if BR2_TARGET_EDK2_PLATFORM_ARM_SGI575
|
||||
default "FVP_AARCH64_EFI" if BR2_TARGET_EDK2_PLATFORM_ARM_VEXPRESS_FVP_AARCH64
|
||||
default "FVP_AARCH64_EFI" if BR2_TARGET_EDK2_PLATFORM_SOCIONEXT_DEVELOPERBOX
|
||||
default "ARMADA_EFI" if BR2_TARGET_EDK2_PLATFORM_SOLIDRUN_ARMADA80X0MCBIN
|
||||
|
||||
endif
|
||||
|
||||
comment "EDK2 needs a toolchain w/ gcc >= 5"
|
||||
depends on !BR2_TOOLCHAIN_GCC_AT_LEAST_5
|
||||
@@ -0,0 +1,3 @@
|
||||
# Locally calculated
|
||||
sha256 04791c13b414a6d1877182a6d565cb762c30aa63e49bb4d495fca68ef4dd209d edk2-edk2-stable202102-br1.tar.gz
|
||||
sha256 50ce20c9cfdb0e19ee34fe0a51fc0afe961f743697b068359ab2f862b494df80 License.txt
|
||||
@@ -0,0 +1,159 @@
|
||||
################################################################################
|
||||
#
|
||||
# edk2
|
||||
#
|
||||
################################################################################
|
||||
|
||||
EDK2_VERSION = edk2-stable202102
|
||||
EDK2_SITE = https://github.com/tianocore/edk2
|
||||
EDK2_SITE_METHOD = git
|
||||
EDK2_LICENSE = BSD-2-Clause
|
||||
EDK2_LICENSE_FILE = License.txt
|
||||
EDK2_CPE_ID_VENDOR = tianocore
|
||||
EDK2_DEPENDENCIES = edk2-platforms host-python3 host-acpica host-util-linux
|
||||
EDK2_INSTALL_TARGET = NO
|
||||
EDK2_INSTALL_IMAGES = YES
|
||||
|
||||
ifeq ($(BR2_ENABLE_DEBUG),y)
|
||||
EDK2_BUILD_TYPE = DEBUG
|
||||
else
|
||||
EDK2_BUILD_TYPE = RELEASE
|
||||
endif
|
||||
|
||||
# Build system notes.
|
||||
#
|
||||
# The EDK2 build system is rather unique, so here are a few useful notes.
|
||||
#
|
||||
# First, builds rely heavily on Git submodules to fetch various dependencies
|
||||
# into specific directory structures. It might be possible to work around this
|
||||
# and rely on Buildroot's infrastructure, but using Git submodules greatly
|
||||
# simplifies this already complicated build system.
|
||||
#
|
||||
# Second, the build system is spread across various commands and stages.
|
||||
# Therefore, all build variables needs to be exported to be available
|
||||
# accordingly. The first stage will build $(@D)/BaseTools which contains
|
||||
# various tools and scripts for the host.
|
||||
#
|
||||
# Third, where applicable, the dependency direction between EDK2 and
|
||||
# ARM Trusted Firmware (ATF) will go in different direction for different
|
||||
# platforms. Most commonly, ATF will depend on EDK2 via the BL33 payload.
|
||||
# But for some platforms (e.g. QEMU SBSA or DeveloperBox) EDK2 will package
|
||||
# the ATF images within its own build system. In such cases, intermediary
|
||||
# "EDK2 packages" will be built in $(EDK2_BUILD_PACKAGES) in order for EDK2
|
||||
# to be able to use them in subsequent build stages.
|
||||
#
|
||||
# For more information about the build setup:
|
||||
# https://edk2-docs.gitbook.io/edk-ii-build-specification/4_edk_ii_build_process_overview
|
||||
|
||||
EDK2_GIT_SUBMODULES = YES
|
||||
EDK2_BUILD_PACKAGES = $(@D)/Build/Buildroot
|
||||
EDK2_PACKAGES_PATH = $(@D):$(EDK2_BUILD_PACKAGES):$(STAGING_DIR)/usr/share/edk2-platforms
|
||||
|
||||
ifeq ($(BR2_TARGET_EDK2_PLATFORM_OVMF_I386),y)
|
||||
EDK2_ARCH = IA32
|
||||
EDK2_DEPENDENCIES += host-nasm
|
||||
EDK2_PACKAGE_NAME = OvmfPkg
|
||||
EDK2_PLATFORM_NAME = OvmfPkgIa32
|
||||
EDK2_BUILD_DIR = OvmfIa32
|
||||
|
||||
else ifeq ($(BR2_TARGET_EDK2_PLATFORM_OVMF_X64),y)
|
||||
EDK2_ARCH = X64
|
||||
EDK2_DEPENDENCIES += host-nasm
|
||||
EDK2_PACKAGE_NAME = OvmfPkg
|
||||
EDK2_PLATFORM_NAME = OvmfPkgX64
|
||||
EDK2_BUILD_DIR = OvmfX64
|
||||
|
||||
else ifeq ($(BR2_TARGET_EDK2_PLATFORM_ARM_VIRT_QEMU),y)
|
||||
EDK2_ARCH = AARCH64
|
||||
EDK2_PACKAGE_NAME = ArmVirtPkg
|
||||
EDK2_PLATFORM_NAME = ArmVirtQemu
|
||||
EDK2_BUILD_DIR = $(EDK2_PLATFORM_NAME)-$(EDK2_ARCH)
|
||||
|
||||
else ifeq ($(BR2_TARGET_EDK2_PLATFORM_ARM_VIRT_QEMU_KERNEL),y)
|
||||
EDK2_ARCH = AARCH64
|
||||
EDK2_PACKAGE_NAME = ArmVirtPkg
|
||||
EDK2_PLATFORM_NAME = ArmVirtQemuKernel
|
||||
EDK2_BUILD_DIR = $(EDK2_PLATFORM_NAME)-$(EDK2_ARCH)
|
||||
|
||||
else ifeq ($(BR2_TARGET_EDK2_PLATFORM_ARM_VEXPRESS_FVP_AARCH64),y)
|
||||
EDK2_ARCH = AARCH64
|
||||
EDK2_PACKAGE_NAME = Platform/ARM/VExpressPkg
|
||||
EDK2_PLATFORM_NAME = ArmVExpress-FVP-AArch64
|
||||
EDK2_BUILD_DIR = $(EDK2_PLATFORM_NAME)
|
||||
|
||||
else ifeq ($(BR2_TARGET_EDK2_PLATFORM_SOCIONEXT_DEVELOPERBOX),y)
|
||||
EDK2_ARCH = AARCH64
|
||||
EDK2_DEPENDENCIES += host-dtc arm-trusted-firmware
|
||||
EDK2_PACKAGE_NAME = Platform/Socionext/DeveloperBox
|
||||
EDK2_PLATFORM_NAME = DeveloperBox
|
||||
EDK2_BUILD_DIR = $(EDK2_PLATFORM_NAME)
|
||||
EDK2_BUILD_ENV += DTC_PREFIX=$(HOST_DIR)/bin/
|
||||
EDK2_BUILD_OPTS += -D DO_X86EMU=TRUE
|
||||
EDK2_PRE_BUILD_HOOKS += EDK2_PRE_BUILD_SOCIONEXT_DEVELOPERBOX
|
||||
|
||||
define EDK2_PRE_BUILD_SOCIONEXT_DEVELOPERBOX
|
||||
mkdir -p $(EDK2_BUILD_PACKAGES)/Platform/Socionext/DeveloperBox
|
||||
$(ARM_TRUSTED_FIRMWARE_DIR)/tools/fiptool/fiptool create \
|
||||
--tb-fw $(BINARIES_DIR)/bl31.bin \
|
||||
--soc-fw $(BINARIES_DIR)/bl31.bin \
|
||||
--scp-fw $(BINARIES_DIR)/bl31.bin \
|
||||
$(EDK2_BUILD_PACKAGES)/Platform/Socionext/DeveloperBox/fip_all_arm_tf.bin
|
||||
endef
|
||||
|
||||
else ifeq ($(BR2_TARGET_EDK2_PLATFORM_SOLIDRUN_ARMADA80X0MCBIN),y)
|
||||
EDK2_ARCH = AARCH64
|
||||
EDK2_DEPENDENCIES += host-dtc arm-trusted-firmware
|
||||
EDK2_PACKAGE_NAME = Platform/SolidRun/Armada80x0McBin
|
||||
EDK2_PLATFORM_NAME = Armada80x0McBin
|
||||
EDK2_BUILD_DIR = $(EDK2_PLATFORM_NAME)-$(EDK2_ARCH)
|
||||
EDK2_BUILD_ENV += DTC_PREFIX=$(HOST_DIR)/bin/
|
||||
EDK2_BUILD_OPTS += -D INCLUDE_TFTP_COMMAND
|
||||
|
||||
else ifeq ($(BR2_TARGET_EDK2_PLATFORM_QEMU_SBSA),y)
|
||||
EDK2_ARCH = AARCH64
|
||||
EDK2_DEPENDENCIES += arm-trusted-firmware
|
||||
EDK2_PACKAGE_NAME = Platform/Qemu/SbsaQemu
|
||||
EDK2_PLATFORM_NAME = SbsaQemu
|
||||
EDK2_BUILD_DIR = $(EDK2_PLATFORM_NAME)
|
||||
EDK2_PRE_BUILD_HOOKS += EDK2_PRE_BUILD_QEMU_SBSA
|
||||
|
||||
define EDK2_PRE_BUILD_QEMU_SBSA
|
||||
mkdir -p $(EDK2_BUILD_PACKAGES)/Platform/Qemu/Sbsa
|
||||
ln -srf $(BINARIES_DIR)/{bl1.bin,fip.bin} $(EDK2_BUILD_PACKAGES)/Platform/Qemu/Sbsa/
|
||||
endef
|
||||
|
||||
endif
|
||||
|
||||
EDK2_BASETOOLS_OPTS = \
|
||||
EXTRA_LDFLAGS="$(HOST_LDFLAGS)" \
|
||||
EXTRA_OPTFLAGS="$(HOST_CPPFLAGS)"
|
||||
|
||||
EDK2_BUILD_ENV += \
|
||||
WORKSPACE=$(@D) \
|
||||
PACKAGES_PATH=$(EDK2_PACKAGES_PATH) \
|
||||
PYTHON_COMMAND=$(HOST_DIR)/bin/python3 \
|
||||
IASL_PREFIX=$(HOST_DIR)/bin/ \
|
||||
NASM_PREFIX=$(HOST_DIR)/bin/ \
|
||||
GCC5_$(EDK2_ARCH)_PREFIX=$(TARGET_CROSS)
|
||||
|
||||
EDK2_BUILD_OPTS += \
|
||||
-t GCC5 \
|
||||
-n $(BR2_JLEVEL) \
|
||||
-a $(EDK2_ARCH) \
|
||||
-b $(EDK2_BUILD_TYPE) \
|
||||
-p $(EDK2_PACKAGE_NAME)/$(EDK2_PLATFORM_NAME).dsc
|
||||
|
||||
define EDK2_BUILD_CMDS
|
||||
mkdir -p $(EDK2_BUILD_PACKAGES)
|
||||
export $(EDK2_BUILD_ENV) && \
|
||||
unset ARCH && \
|
||||
source $(@D)/edksetup.sh && \
|
||||
$(TARGET_MAKE_ENV) $(MAKE) -C $(@D)/BaseTools $(EDK2_BASETOOLS_OPTS) && \
|
||||
build $(EDK2_BUILD_OPTS) all
|
||||
endef
|
||||
|
||||
define EDK2_INSTALL_IMAGES_CMDS
|
||||
cp -f $(@D)/Build/$(EDK2_BUILD_DIR)/$(EDK2_BUILD_TYPE)_GCC5/FV/*.fd $(BINARIES_DIR)
|
||||
endef
|
||||
|
||||
$(eval $(generic-package))
|
||||
Reference in New Issue
Block a user