initial buildroot for linux 5.15

board/stmicroelectronics/common/stm32f4xx/stm32-post-build.sh

@@ -0,0 +1,8 @@
+#!/bin/sh
+
+# Kernel is built without devpts support
+sed -i '/^devpts/d' ${TARGET_DIR}/etc/fstab
+
+# Kernel is built without network support
+rm -f ${TARGET_DIR}/etc/init.d/S40network
+rm -rf ${TARGET_DIR}/etc/network/

board/stmicroelectronics/common/stm32mp157/genimage.cfg.template

@@ -0,0 +1,23 @@
+image sdcard.img {
+	hdimage {
+		gpt = "true"
+	}
+
+	partition fsbl1 {
+		image = "%ATFBIN%"
+	}
+
+	partition fsbl2 {
+		image = "%ATFBIN%"
+	}
+
+	partition ssbl {
+		image = "u-boot.stm32"
+		size = 2M
+	}
+
+	partition rootfs {
+		image = "rootfs.ext4"
+		bootable = "yes"
+	}
+}

board/stmicroelectronics/common/stm32mp157/post-image.sh

@@ -0,0 +1,38 @@
+#!/usr/bin/env bash
+
+#
+# atf_image extracts the ATF binary image from DTB_FILE_NAME that appears in
+# BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES in ${BR_CONFIG},
+# then prints the corresponding file name for the genimage
+# configuration file
+#
+atf_image()
+{
+	local ATF_VARIABLES="$(sed -n 's/^BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES="\([\/a-zA-Z0-9_=. \-]*\)"$/\1/p' ${BR2_CONFIG})"
+
+	if grep -Eq "DTB_FILE_NAME=stm32mp157c-dk2.dtb" <<< ${ATF_VARIABLES}; then
+		echo "tf-a-stm32mp157c-dk2.stm32"
+	elif grep -Eq "DTB_FILE_NAME=stm32mp157a-dk1.dtb" <<< ${ATF_VARIABLES}; then
+                echo "tf-a-stm32mp157a-dk1.stm32"
+	elif grep -Eq "DTB_FILE_NAME=stm32mp157a-avenger96.dtb" <<< ${ATF_VARIABLES}; then
+                echo "tf-a-stm32mp157a-avenger96.stm32"
+	fi
+}
+
+main()
+{
+	local ATFBIN="$(atf_image)"
+	local GENIMAGE_CFG="$(mktemp --suffix genimage.cfg)"
+	local GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+	sed -e "s/%ATFBIN%/${ATFBIN}/" \
+		board/stmicroelectronics/common/stm32mp157/genimage.cfg.template > ${GENIMAGE_CFG}
+
+	support/scripts/genimage.sh -c ${GENIMAGE_CFG}
+
+	rm -f ${GENIMAGE_CFG}
+
+	exit $?
+}
+
+main $@

board/stmicroelectronics/stm32f429-disco/flash.sh

@@ -0,0 +1,26 @@
+#!/bin/bash
+
+OUTPUT_DIR=$1
+BOARD_NAME=${2:-stm32f429discovery}
+
+if ! test -d "${OUTPUT_DIR}" ; then
+    echo "ERROR: no output directory specified."
+    echo "Usage: $0 OUTPUT_DIR BOARD_NAME"
+    echo ""
+    echo "Arguments:"
+    echo "    OUTPUT_DIR    The Buildroot output directory."
+    echo "    BOARD_NAME    One of the available boards among:"
+    echo "                  stm32f429discovery, stm32f429disc1"
+    exit 1
+fi
+
+${OUTPUT_DIR}/host/bin/openocd -f board/${BOARD_NAME}.cfg \
+  -c "init" \
+  -c "reset init" \
+  -c "flash probe 0" \
+  -c "flash info 0" \
+  -c "flash write_image erase ${OUTPUT_DIR}/images/stm32f429i-disco.bin 0x08000000" \
+  -c "flash write_image erase ${OUTPUT_DIR}/images/stm32f429-disco.dtb 0x08004000" \
+  -c "flash write_image erase ${OUTPUT_DIR}/images/xipImage 0x08008000" \
+  -c "reset run" \
+  -c "shutdown"

board/stmicroelectronics/stm32f429-disco/patches/linux/0001-ARM-stm32f249-disco-don-t-force-init-in-chosen-boota.patch

@@ -0,0 +1,32 @@
+From ded9afa688184b3240a92c2b8f114c545a09bc3f Mon Sep 17 00:00:00 2001
+From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+Date: Sat, 12 Mar 2016 23:14:41 +0100
+Subject: [PATCH] ARM: stm32f249-disco: don't force init= in /chosen/bootargs
+
+There is no reason to override the kernel's default init= value, as
+this breaks userspace that assumes the kernel default of /init is
+used. Since stm32 is often used with a minimal bootloader
+(afboot-stm32) that doesn't provide any mechanism to override the DTB,
+we need to adjust the kernel command line in the Device Tree source.
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+---
+ arch/arm/boot/dts/stm32f429-disco.dts | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/arm/boot/dts/stm32f429-disco.dts b/arch/arm/boot/dts/stm32f429-disco.dts
+index f0b731d..2bae81c 100644
+--- a/arch/arm/boot/dts/stm32f429-disco.dts
++++ b/arch/arm/boot/dts/stm32f429-disco.dts
+@@ -53,7 +53,7 @@
+ 	compatible = "st,stm32f429i-disco", "st,stm32f429";
+ 
+ 	chosen {
+-		bootargs = "root=/dev/ram rdinit=/linuxrc";
++		bootargs = "root=/dev/ram";
+ 		stdout-path = "serial0:115200n8";
+ 	};
+ 
+-- 
+2.6.4
+

board/stmicroelectronics/stm32f429-disco/readme.txt

@@ -0,0 +1,37 @@
+STM32F429 Discovery
+===================
+
+This tutorial describes how to use the predefined Buildroot
+configuration for the STM32F429 Discovery evaluation platform.
+
+Supported HW
+------------
+
+ - STM32F429I-DISCO evaluation board
+ - STM32F429I-DISC1 evaluation board
+
+Building
+--------
+
+  make stm32f429_disco_defconfig
+  make
+
+Wire the UART
+-------------
+
+Use a USB to TTL adapter, and connect:
+
+ - RX to PA9
+ - TX to PA10
+ - GND to one of the GND available on the board
+
+The UART is configured at 115200.
+
+Flashing
+--------
+
+  ./board/stmicroelectronics/stm32f429-disco/flash.sh output/ \
+      {stm32f429discovery|stm32f429disc1}
+
+It will flash the minimal bootloader, the Device Tree Blob, and the
+kernel image which includes the root filesystem as initramfs.

board/stmicroelectronics/stm32f469-disco/extlinux.conf

@@ -0,0 +1,4 @@
+label stm32f469-disco-buildroot
+  kernel /zImage
+  devicetree /stm32f469-disco.dtb
+  append console=ttySTM0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext2 rootwait earlyprintk consoleblank=0 ignore_loglevel

board/stmicroelectronics/stm32f469-disco/flash.sh

@@ -0,0 +1,18 @@
+#!/bin/bash
+
+OUTPUT_DIR=$1
+
+if ! test -d "${OUTPUT_DIR}" ; then
+    echo "ERROR: no output directory specified."
+    echo "Usage: $0 OUTPUT_DIR"
+    exit 1
+fi
+
+${OUTPUT_DIR}/host/bin/openocd -f board/stm32f469discovery.cfg \
+  -c "init" \
+  -c "reset init" \
+  -c "flash probe 0" \
+  -c "flash info 0" \
+  -c "flash write_image erase ${OUTPUT_DIR}/images/u-boot.bin 0x08000000" \
+  -c "reset run" \
+  -c "shutdown"

board/stmicroelectronics/stm32f469-disco/flash_xip.sh

@@ -0,0 +1,20 @@
+#!/bin/bash
+
+OUTPUT_DIR=$1
+
+if ! test -d "${OUTPUT_DIR}"; then
+    echo "ERROR: no output directory specified."
+    echo "Usage: $0 OUTPUT_DIR"
+    exit 1
+fi
+
+${OUTPUT_DIR}/host/bin/openocd -f board/stm32f469discovery.cfg \
+  -c "init" \
+  -c "reset init" \
+  -c "flash probe 0" \
+  -c "flash info 0" \
+  -c "flash write_image erase ${OUTPUT_DIR}/images/stm32f469i-disco.bin 0x08000000" \
+  -c "flash write_image erase ${OUTPUT_DIR}/images/stm32f469-disco.dtb 0x08004000" \
+  -c "flash write_image erase ${OUTPUT_DIR}/images/xipImage 0x08010000" \
+  -c "reset run" \
+  -c "shutdown"

board/stmicroelectronics/stm32f469-disco/genimage.cfg

@@ -0,0 +1,27 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"zImage",
+			"stm32f469-disco.dtb",
+			"extlinux"
+		}
+	}
+
+	size = 16M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot {
+		partition-type = 0xC
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext2"
+		size = 32M
+	}
+}

board/stmicroelectronics/stm32f469-disco/linux-xip.config

@@ -0,0 +1,120 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_XZ=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_LOG_BUF_SHIFT=12
+CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=10
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio"
+# CONFIG_RD_GZIP is not set
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+# CONFIG_RD_ZSTD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_MULTIUSER is not set
+# CONFIG_SYSFS_SYSCALL is not set
+# CONFIG_FHANDLE is not set
+# CONFIG_POSIX_TIMERS is not set
+# CONFIG_BUG is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_IO_URING is not set
+# CONFIG_ADVISE_SYSCALLS is not set
+# CONFIG_MEMBARRIER is not set
+# CONFIG_KALLSYMS is not set
+CONFIG_KCMP=y
+# CONFIG_RSEQ is not set
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLOB=y
+# CONFIG_SLAB_MERGE_DEFAULT is not set
+# CONFIG_MMU is not set
+CONFIG_ARCH_STM32=y
+# CONFIG_MACH_STM32F429 is not set
+# CONFIG_MACH_STM32F746 is not set
+# CONFIG_MACH_STM32F769 is not set
+# CONFIG_MACH_STM32H743 is not set
+CONFIG_CPU_V7M_NUM_IRQ=240
+# CONFIG_ARM_DMA_MEM_BUFFERABLE is not set
+CONFIG_SET_MEM_PARAM=y
+CONFIG_DRAM_BASE=0xc0000000
+CONFIG_DRAM_SIZE=0x01000000
+CONFIG_HZ_1000=y
+# CONFIG_ATAGS is not set
+CONFIG_XIP_KERNEL=y
+CONFIG_XIP_PHYS_ADDR=0x08010000
+CONFIG_XIP_DEFLATED_DATA=y
+# CONFIG_SUSPEND is not set
+# CONFIG_STACKPROTECTOR is not set
+# CONFIG_COMPAT_32BIT_TIME is not set
+# CONFIG_GCC_PLUGINS is not set
+# CONFIG_BLOCK is not set
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_COREDUMP is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+CONFIG_EEPROM_93CX6=y
+# CONFIG_INPUT is not set
+# CONFIG_VT is not set
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_LDISC_AUTOLOAD is not set
+CONFIG_SERIAL_STM32=y
+CONFIG_SERIAL_STM32_CONSOLE=y
+# CONFIG_DEVMEM is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_MFD_STM32_TIMERS=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_STM32=y
+CONFIG_DMADEVICES=y
+CONFIG_STM32_DMA=y
+CONFIG_STM32_DMAMUX=y
+CONFIG_STM32_MDMA=y
+CONFIG_SYNC_FILE=y
+# CONFIG_VIRTIO_MENU is not set
+# CONFIG_VHOST_MENU is not set
+CONFIG_IIO=y
+CONFIG_IIO_BUFFER=y
+CONFIG_IIO_TRIGGERED_BUFFER=y
+CONFIG_IIO_STM32_TIMER_TRIGGER=y
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_PROC_SYSCTL is not set
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NLS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
+CONFIG_CONSOLE_LOGLEVEL_QUIET=15
+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7
+# CONFIG_SYMBOLIC_ERRNAME is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_MISC is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_RCU_TRACE is not set
+# CONFIG_RUNTIME_TESTING_MENU is not set

board/stmicroelectronics/stm32f469-disco/linux.fragment

@@ -0,0 +1,7 @@
+# CONFIG_XIP_KERNEL is not set
+CONFIG_DRM=y
+CONFIG_DRM_STM=y
+CONFIG_DRM_STM_DSI=y
+CONFIG_DRM_PANEL_ORISETECH_OTM8009A=y
+CONFIG_FB=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y

board/stmicroelectronics/stm32f469-disco/patches/afboot-stm32/0001-stm32f469-i-Update-kernel-start-address.patch

@@ -0,0 +1,56 @@
+From fe5f3a86d07e378baeeddc1dfecd0686d83aa42f Mon Sep 17 00:00:00 2001
+From: Yauheni Saldatsenka <eugentoo@gmail.com>
+Date: Sat, 14 Aug 2021 18:54:51 +0300
+Subject: [PATCH] stm32f469-i: Update kernel start address
+
+As of GNU/Linux v5.12 kernel device tree binary grows above 0x08008000
+and overwrites kernel binary
+Therefore this commit moves kernel to the next flash bank
+
+Signed-off-by: Yauheni Saldatsenka <eugentoo@gmail.com>
+---
+ stm32f469i-disco.c | 7 +++----
+ 1 file changed, 3 insertions(+), 4 deletions(-)
+
+diff --git a/stm32f469i-disco.c b/stm32f469i-disco.c
+index 2da1f4b..46fc06a 100644
+--- a/stm32f469i-disco.c
++++ b/stm32f469i-disco.c
+@@ -6,6 +6,7 @@
+ #include "gpio.h"
+ #include "mpu.h"
+ 
++#define KERNEL_ADDR     0x08010000
+ #define CONFIG_HSE_HZ	8000000
+ #define CONFIG_PLL_M	8
+ #define CONFIG_PLL_N	360
+@@ -85,7 +86,7 @@ static void fmc_wait_busy(void)
+ 
+ void start_kernel(void)
+ {
+-	void (*kernel)(uint32_t reserved, uint32_t mach, uint32_t dt) = (void (*)(uint32_t, uint32_t, uint32_t))(0x08008000 | 1);
++	void (*kernel)(uint32_t reserved, uint32_t mach, uint32_t dt) = (void (*)(uint32_t, uint32_t, uint32_t))(KERNEL_ADDR | 1);
+ 
+ 	kernel(0, ~0UL, 0x08004000);
+ }
+@@ -102,7 +103,7 @@ int main(void)
+ 	volatile uint32_t *SYSCFG_MEMRMP = (void *)(SYSCFG_BASE + 0x00);
+ 	int i;
+ 
+-	mpu_config(0x0);
++	mpu_config(0xc0000000);
+ 
+ 	if (*FLASH_CR & FLASH_CR_LOCK) {
+ 		*FLASH_KEYR = 0x45670123;
+@@ -195,8 +196,6 @@ int main(void)
+ 	usart_setup(usart_base, 45000000);
+ 	usart_putch(usart_base, '.');
+ 
+-	*SYSCFG_MEMRMP = 0x4;
+-
+ 	start_kernel();
+ 
+ 	return 0;
+-- 
+2.32.0
+

board/stmicroelectronics/stm32f469-disco/patches/linux/0001-Use-default-dram-address-without-remapping.patch

@@ -0,0 +1,38 @@
+From 8ccf9f625d00138d86fb7d70f3efd58a8fb4d7ff Mon Sep 17 00:00:00 2001
+From: Yauheni Saldatsenka <eugentoo@gmail.com>
+Date: Mon, 23 Aug 2021 02:54:22 +0300
+Subject: [PATCH] Use default dram address without remapping
+
+Signed-off-by: Yauheni Saldatsenka <eugentoo@gmail.com>
+---
+ arch/arm/boot/dts/stm32f469-disco.dts | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/boot/dts/stm32f469-disco.dts b/arch/arm/boot/dts/stm32f469-disco.dts
+index 2e1b3bbbe4b5..06845614a19a 100644
+--- a/arch/arm/boot/dts/stm32f469-disco.dts
++++ b/arch/arm/boot/dts/stm32f469-disco.dts
+@@ -60,9 +60,9 @@ chosen {
+ 		stdout-path = "serial0:115200n8";
+ 	};
+ 
+-	memory@00000000 {
++	memory@c0000000 {
+ 		device_type = "memory";
+-		reg = <0x00000000 0x1000000>;
++		reg = <0xc0000000 0x1000000>;
+ 	};
+ 
+ 	aliases {
+@@ -84,7 +84,7 @@ vdd_dsi: vdd-dsi {
+ 	};
+ 
+ 	soc {
+-		dma-ranges = <0xc0000000 0x0 0x10000000>;
++		dma-ranges = <0xc0000000 0xc0000000 0x10000000>;
+ 	};
+ 
+ 	leds {
+-- 
+2.32.0
+

board/stmicroelectronics/stm32f469-disco/post-build.sh

@@ -0,0 +1,4 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf

board/stmicroelectronics/stm32f469-disco/readme.txt

@@ -0,0 +1,45 @@
+STM32F469 Discovery
+===================
+
+This tutorial describes how to use the predefined Buildroot
+configuration for the STM32F469 Discovery evaluation platform.
+
+Building
+--------
+
+  make stm32f469_disco_defconfig
+  make
+
+Flashing
+--------
+
+  ./board/stmicroelectronics/stm32f469-disco/flash.sh output/
+
+It will flash the U-boot bootloader.
+
+Creating SD card
+----------------
+
+Buildroot prepares an"sdcard.img" image in the output/images/ directory,
+ready to be dumped on a SD card. Launch the following command as root:
+
+  dd if=output/images/sdcard.img of=/dev/<your-sd-device>
+
+*** WARNING! This will destroy all the card content. Use with care! ***
+
+For details about the medium image layout and its content, see the
+definition in board/stmicroelectronics/stm32f469-disco/genimage.cfg.
+
+Framebuffer
+-----------
+After Linux boots, /dev/fb0 will be accessible. You can control the
+brightness of the display after enabling the framebuffer by running the
+following commands:
+
+   # echo 0 0 > /sys/class/graphics/fb0/pan
+   # echo 255 >/sys/class/backlight/40016c00.dsi.0/brightness
+
+The brightness ranges from 0 to 255, as you can see running the
+command:
+
+   # cat /sys/class/backlight/40016c00.dsi.0/max_brightness

board/stmicroelectronics/stm32f469-disco/readme_xip.txt

@@ -0,0 +1,24 @@
+STM32F469 Discovery
+===================
+
+This tutorial describes how to use the predefined Buildroot
+configuration for the STM32F469 Discovery evaluation platform.
+
+Internal flash memory stores simple afboot-stm32 bootloader, device tree and
+in place (XIP) kernel with built-in initramfs. No external flash or SD card
+is needed.
+
+Kernel is based on tinyconfig.
+
+Building
+--------
+
+  make stm32f469_disco_xip_defconfig
+  make
+
+Flashing
+--------
+
+  ./board/stmicroelectronics/stm32f469-disco/flash.sh output/
+
+It will flash binary to internal flash memory.

board/stmicroelectronics/stm32mp157a-dk1/linux.config

@@ -0,0 +1,182 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_USELIB=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_ARCH_STM32=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_754327=y
+CONFIG_ARM_ERRATA_764369=y
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_ARM_ERRATA_798181=y
+CONFIG_SMP=y
+CONFIG_MCPM=y
+CONFIG_HIGHMEM=y
+CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_SECCOMP=y
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_KERNEL_MODE_NEON=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMDLINE_PARTITION=y
+CONFIG_CMA=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_CAN=y
+CONFIG_CAN_M_CAN=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=128
+CONFIG_SIMPLE_PM_BUS=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_STM32_FMC2=y
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_SRAM=y
+CONFIG_EEPROM_AT24=y
+CONFIG_NETDEVICES=y
+CONFIG_VIRTIO_NET=y
+CONFIG_KS8851=y
+CONFIG_SMSC911X=y
+CONFIG_STMMAC_ETH=y
+CONFIG_DWMAC_DWC_QOS_ETH=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_EDT_FT5X06=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_STPMIC1_ONKEY=y
+CONFIG_SERIAL_STM32=y
+CONFIG_SERIAL_STM32_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_STM32F7=y
+CONFIG_SPI=y
+CONFIG_SPI_STM32=y
+CONFIG_SPI_STM32_QSPI=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_PINCTRL_STMFX=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
+CONFIG_SYSCON_REBOOT_MODE=y
+CONFIG_WATCHDOG=y
+CONFIG_STPMIC1_WATCHDOG=y
+CONFIG_MFD_STM32_LPTIMER=y
+CONFIG_MFD_STPMIC1=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_STM32_VREFBUF=y
+CONFIG_REGULATOR_STM32_PWR=y
+CONFIG_REGULATOR_STPMIC1=y
+CONFIG_DRM=y
+CONFIG_DRM_STM=y
+CONFIG_DRM_STM_DSI=y
+# CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set
+# CONFIG_DRM_SII902X is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_LCD_CLASS_DEVICE is not set
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+# CONFIG_BACKLIGHT_GENERIC is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_USB=y
+CONFIG_USB_OTG=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PLATFORM=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_ISP1760=y
+CONFIG_USB_HSIC_USB3503=y
+CONFIG_USB_GPIO_VBUS=y
+CONFIG_USB_ISP1301=y
+CONFIG_USB_ULPI=y
+CONFIG_TYPEC=y
+CONFIG_TYPEC_STUSB=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=16
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_DW=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_STM32=y
+CONFIG_DMADEVICES=y
+CONFIG_STM32_DMA=y
+CONFIG_STM32_DMAMUX=y
+CONFIG_STM32_MDMA=y
+CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_STM32=y
+CONFIG_STM32_IPCC=y
+CONFIG_REMOTEPROC=y
+CONFIG_STM32_RPROC=y
+CONFIG_RPMSG_VIRTIO=y
+CONFIG_RPMSG_TTY=y
+CONFIG_IIO=y
+CONFIG_IIO_SW_TRIGGER=y
+CONFIG_SD_ADC_MODULATOR=y
+CONFIG_STM32_ADC_CORE=y
+CONFIG_STM32_ADC=y
+CONFIG_STM32_ADC_TEMP=y
+CONFIG_STM32_DFSDM_ADC=y
+CONFIG_STM32_LPTIMER_CNT=y
+CONFIG_STM32_DAC=y
+CONFIG_IIO_HRTIMER_TRIGGER=y
+CONFIG_IIO_STM32_LPTIMER_TRIGGER=y
+CONFIG_PWM=y
+CONFIG_PWM_STM32=y
+CONFIG_PWM_STM32_LP=y
+CONFIG_PHY_STM32_USBPHYC=y
+CONFIG_NVMEM_STM32_ROMEM=y
+CONFIG_EXT4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_PRINTK_TIME=y

board/stmicroelectronics/stm32mp157a-dk1/overlay/boot/extlinux/extlinux.conf

@@ -0,0 +1,4 @@
+label stm32mp157a-dk1-buildroot
+  kernel /boot/zImage
+  devicetree /boot/stm32mp157a-dk1.dtb
+  append root=/dev/mmcblk0p4 rootwait

board/stmicroelectronics/stm32mp157a-dk1/readme.txt

@@ -0,0 +1,38 @@
+STM32MP157A Discovery Kit v1
+
+Intro
+=====
+
+This configuration supports the STM32MP157 Discovery Kit 1 (DK1)
+platform:
+
+  https://www.st.com/en/evaluation-tools/stm32mp157a-dk1.html
+
+How to build
+============
+
+ $ make stm32mp157a_dk1_defconfig
+ $ make
+
+How to write the microSD card
+=============================
+
+Once the build process is finished you will have an image called
+"sdcard.img" in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an microSD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Boot the board
+==============
+
+ (1) Insert the microSD card in connector CN15
+
+ (2) Plug a micro-USB cable in connector CN11 and run your serial
+     communication program on /dev/ttyACM0.
+
+ (3) Plug a USB-C cable in CN6 to power-up the board.
+
+ (4) The system will start, with the console on UART, but also visible
+     on the screen.

board/stmicroelectronics/stm32mp157c-dk2/linux.config

@@ -0,0 +1,182 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_USELIB=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_ARCH_STM32=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_754327=y
+CONFIG_ARM_ERRATA_764369=y
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_ARM_ERRATA_798181=y
+CONFIG_SMP=y
+CONFIG_MCPM=y
+CONFIG_HIGHMEM=y
+CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_SECCOMP=y
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_KERNEL_MODE_NEON=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMDLINE_PARTITION=y
+CONFIG_CMA=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_CAN=y
+CONFIG_CAN_M_CAN=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=128
+CONFIG_SIMPLE_PM_BUS=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_STM32_FMC2=y
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_SRAM=y
+CONFIG_EEPROM_AT24=y
+CONFIG_NETDEVICES=y
+CONFIG_VIRTIO_NET=y
+CONFIG_KS8851=y
+CONFIG_SMSC911X=y
+CONFIG_STMMAC_ETH=y
+CONFIG_DWMAC_DWC_QOS_ETH=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_EDT_FT5X06=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_STPMIC1_ONKEY=y
+CONFIG_SERIAL_STM32=y
+CONFIG_SERIAL_STM32_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_STM32F7=y
+CONFIG_SPI=y
+CONFIG_SPI_STM32=y
+CONFIG_SPI_STM32_QSPI=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_PINCTRL_STMFX=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
+CONFIG_SYSCON_REBOOT_MODE=y
+CONFIG_WATCHDOG=y
+CONFIG_STPMIC1_WATCHDOG=y
+CONFIG_MFD_STM32_LPTIMER=y
+CONFIG_MFD_STPMIC1=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_STM32_VREFBUF=y
+CONFIG_REGULATOR_STM32_PWR=y
+CONFIG_REGULATOR_STPMIC1=y
+CONFIG_DRM=y
+CONFIG_DRM_STM=y
+CONFIG_DRM_STM_DSI=y
+CONFIG_DRM_PANEL_ORISETECH_OTM8009A=y
+CONFIG_DRM_SII902X=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_USB=y
+CONFIG_USB_OTG=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PLATFORM=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_ISP1760=y
+CONFIG_USB_HSIC_USB3503=y
+CONFIG_USB_GPIO_VBUS=y
+CONFIG_USB_ISP1301=y
+CONFIG_USB_ULPI=y
+CONFIG_TYPEC=y
+CONFIG_TYPEC_STUSB=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=16
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_DW=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_STM32=y
+CONFIG_DMADEVICES=y
+CONFIG_STM32_DMA=y
+CONFIG_STM32_DMAMUX=y
+CONFIG_STM32_MDMA=y
+CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_STM32=y
+CONFIG_STM32_IPCC=y
+CONFIG_REMOTEPROC=y
+CONFIG_STM32_RPROC=y
+CONFIG_RPMSG_VIRTIO=y
+CONFIG_RPMSG_TTY=y
+CONFIG_IIO=y
+CONFIG_IIO_SW_TRIGGER=y
+CONFIG_SD_ADC_MODULATOR=y
+CONFIG_STM32_ADC_CORE=y
+CONFIG_STM32_ADC=y
+CONFIG_STM32_ADC_TEMP=y
+CONFIG_STM32_DFSDM_ADC=y
+CONFIG_STM32_LPTIMER_CNT=y
+CONFIG_STM32_DAC=y
+CONFIG_IIO_HRTIMER_TRIGGER=y
+CONFIG_IIO_STM32_LPTIMER_TRIGGER=y
+CONFIG_PWM=y
+CONFIG_PWM_STM32=y
+CONFIG_PWM_STM32_LP=y
+CONFIG_PHY_STM32_USBPHYC=y
+CONFIG_NVMEM_STM32_ROMEM=y
+CONFIG_EXT4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_PRINTK_TIME=y

board/stmicroelectronics/stm32mp157c-dk2/overlay/boot/extlinux/extlinux.conf

@@ -0,0 +1,4 @@
+label stm32mp157c-dk2-buildroot
+  kernel /boot/zImage
+  devicetree /boot/stm32mp157c-dk2.dtb
+  append root=/dev/mmcblk0p4 rootwait

board/stmicroelectronics/stm32mp157c-dk2/readme.txt

@@ -0,0 +1,38 @@
+STM32MP157C Discovery Kit v2
+
+Intro
+=====
+
+This configuration supports the STM32MP157C Discovery Kit 2 (DK2)
+platform:
+
+  https://www.st.com/en/evaluation-tools/stm32mp157c-dk2.html
+
+How to build
+============
+
+ $ make stm32mp157c_dk2_defconfig
+ $ make
+
+How to write the microSD card
+=============================
+
+Once the build process is finished you will have an image called
+"sdcard.img" in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an microSD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Boot the board
+==============
+
+ (1) Insert the microSD card in connector CN15
+
+ (2) Plug a micro-USB cable in connector CN11 and run your serial
+     communication program on /dev/ttyACM0.
+
+ (3) Plug a USB-C cable in CN6 to power-up the board.
+
+ (4) The system will start, with the console on UART, but also visible
+     on the screen.