initial buildroot for linux 5.15
This commit is contained in:
Huan.Feng
@@ -0,0 +1,8 @@
|
||||
setenv fdt_high ffffffff
|
||||
|
||||
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
|
||||
|
||||
fatload mmc 0 $kernel_addr_r zImage
|
||||
fatload mmc 0 $fdt_addr_r sun8i-h3-orangepi-lite.dtb
|
||||
|
||||
bootz $kernel_addr_r - $fdt_addr_r
|
||||
@@ -0,0 +1,37 @@
|
||||
# Minimal SD card image for the OrangePi Lite
|
||||
#
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"zImage",
|
||||
"sun8i-h3-orangepi-lite.dtb",
|
||||
"boot.scr"
|
||||
}
|
||||
}
|
||||
|
||||
size = 10M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot-sunxi-with-spl.bin"
|
||||
offset = 8K
|
||||
size = 1016K # 1MB - 8KB
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
size = 512M
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,15 @@
|
||||
# wireless core
|
||||
CONFIG_WIRELESS=y
|
||||
CONFIG_CFG80211=y
|
||||
CONFIG_MAC80211=y
|
||||
CONFIG_CFG80211_WEXT=y
|
||||
|
||||
# wireless drivers
|
||||
CONFIG_WLAN=y
|
||||
|
||||
# hdmi
|
||||
CONFIG_DRM_SUN8I_DW_HDMI=y
|
||||
CONFIG_SUN8I_DE2_CCU=y
|
||||
|
||||
# analog audio
|
||||
CONFIG_SND_SUN8I_CODEC_ANALOG=y
|
||||
@@ -0,0 +1,29 @@
|
||||
OrangePi Lite
|
||||
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the OrangePi Lite. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
How to build it
|
||||
===============
|
||||
|
||||
Configure Buildroot:
|
||||
|
||||
$ make orangepi_lite_defconfig
|
||||
|
||||
Compile everything and build the SD card image:
|
||||
|
||||
$ make
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
@@ -0,0 +1,4 @@
|
||||
label linux
|
||||
kernel /Image
|
||||
devicetree /sun50i-h6-orangepi-lite2.dtb
|
||||
append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
|
||||
@@ -0,0 +1,34 @@
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"Image",
|
||||
"sun50i-h6-orangepi-lite2.dtb",
|
||||
"extlinux"
|
||||
}
|
||||
}
|
||||
|
||||
size = 64M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot-sunxi-with-spl.bin"
|
||||
offset = 8K
|
||||
size = 1016K # 1MB - 8KB
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
}
|
||||
}
|
||||
Executable
+4
@@ -0,0 +1,4 @@
|
||||
#!/bin/sh
|
||||
BOARD_DIR="$(dirname $0)"
|
||||
|
||||
install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
|
||||
@@ -0,0 +1,44 @@
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the Orangepi Lite2. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
Orangepi Lite2 link:
|
||||
http://www.orangepi.org/Orange%20Pi%20Lite%202/
|
||||
|
||||
Wiki link:
|
||||
https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Lite2
|
||||
|
||||
How to build
|
||||
============
|
||||
|
||||
$ make orangepi_lite2_defconfig
|
||||
$ make
|
||||
|
||||
Note: you will need access to the internet to download the required
|
||||
sources.
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
$ sudo sync
|
||||
|
||||
Insert the micro SDcard in your Orangepi Lite2 and power it up. The console
|
||||
is on the serial line, 115200 8N1.
|
||||
|
||||
WiFi
|
||||
====
|
||||
|
||||
# wpa_passphrase ACCESSPOINTNAME >> /etc/wpa_supplicant.conf
|
||||
(type password and enter)
|
||||
# wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B
|
||||
# udhcpc -i wlan0
|
||||
# ping google.com
|
||||
+82
@@ -0,0 +1,82 @@
|
||||
#AP6255_NVRAM_V1.0_29052015
|
||||
|
||||
NVRAMRev=$Rev: 498373 $
|
||||
sromrev=11
|
||||
vendid=0x14e4
|
||||
devid=0x43ab
|
||||
manfid=0x2d0
|
||||
prodid=0x06e4
|
||||
macaddr=00:90:4c:c5:12:38
|
||||
nocrc=1
|
||||
boardtype=0x6e4
|
||||
boardrev=0x1304
|
||||
xtalfreq=37400
|
||||
#boardflags: 5GHz eTR switch by default
|
||||
#2.4GHz eTR switch by default
|
||||
#bit1 for btcoex
|
||||
boardflags=0x00080201
|
||||
boardflags2=0x40000000
|
||||
boardflags3=0x48200100
|
||||
rxgains2gelnagaina0=0
|
||||
rxgains2gtrisoa0=0
|
||||
rxgains2gtrelnabypa0=0
|
||||
rxgains5gelnagaina0=0
|
||||
rxgains5gtrisoa0=0
|
||||
rxgains5gtrelnabypa0=0
|
||||
rxchain=1
|
||||
txchain=1
|
||||
aa2g=1
|
||||
aa5g=1
|
||||
tssipos5g=1
|
||||
tssipos2g=1
|
||||
femctrl=0
|
||||
AvVmid_c0=0,157,1,126,1,126,1,126,1,126
|
||||
pa2ga0=-112,6296,-662
|
||||
pa2ga1=-165,3699,-515
|
||||
pa5ga0=-143,6016,-683,-141,6013,-678,-137,5988,-670,-136,5982,-670
|
||||
pa5ga1=-161,3544,-499,-166,3543,-497,-169,3569,-497,-171,3598,-498
|
||||
itrsw=1
|
||||
pdoffset2g40ma0=10
|
||||
pdoffset40ma0=0xaaaa
|
||||
pdoffset80ma0=0xaaaa
|
||||
extpagain5g=2
|
||||
extpagain2g=2
|
||||
tworangetssi2g=1
|
||||
tworangetssi5g=1
|
||||
# LTECX flags
|
||||
# WCI2
|
||||
ltecxmux=0
|
||||
ltecxpadnum=0x0504
|
||||
ltecxfnsel=0x22
|
||||
ltecxgcigpio=0x32
|
||||
|
||||
maxp2ga0=64
|
||||
ofdmlrbw202gpo=0x0033
|
||||
dot11agofdmhrbw202gpo=0x1553
|
||||
mcsbw202gpo=0x99355533
|
||||
|
||||
maxp5ga0=80,82,76,77
|
||||
|
||||
mcsbw205glpo=0x99755000
|
||||
mcsbw205gmpo=0x9df55000
|
||||
mcsbw205ghpo=0x99855000
|
||||
|
||||
mcsbw405glpo=0xb8555000
|
||||
mcsbw405gmpo=0xed955000
|
||||
mcsbw405ghpo=0xd9755000
|
||||
|
||||
mcsbw805glpo=0xc8555000
|
||||
mcsbw805gmpo=0xe9555000
|
||||
mcsbw805ghpo=0xd9555000
|
||||
|
||||
swctrlmap_2g=0x00040004,0x00020002,0x00040004,0x010a02,0x1ff
|
||||
swctrlmap_5g=0x00100010,0x00200020,0x00100010,0x010a02,0x2f4
|
||||
swctrlmapext_5g=0x00000000,0x00000000,0x00000000,0x000000,0x000
|
||||
swctrlmapext_2g=0x00000000,0x00000000,0x00000000,0x000000,0x000
|
||||
|
||||
vcodivmode=1
|
||||
deadman_to=481500000
|
||||
ed_thresh2g=-54
|
||||
ed_thresh5g=-54
|
||||
|
||||
muxenab=0x10
|
||||
@@ -0,0 +1,4 @@
|
||||
label linux
|
||||
kernel /Image
|
||||
devicetree /sun50i-h6-orangepi-one-plus.dtb
|
||||
append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
|
||||
@@ -0,0 +1,34 @@
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"Image",
|
||||
"sun50i-h6-orangepi-one-plus.dtb",
|
||||
"extlinux"
|
||||
}
|
||||
}
|
||||
|
||||
size = 64M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot-sunxi-with-spl.bin"
|
||||
offset = 8K
|
||||
size = 1016K # 1MB - 8KB
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
}
|
||||
}
|
||||
+4
@@ -0,0 +1,4 @@
|
||||
#!/bin/sh
|
||||
BOARD_DIR="$(dirname $0)"
|
||||
|
||||
install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
|
||||
@@ -0,0 +1,37 @@
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the Orangepi One Plus. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
Orangepi One Plus link:
|
||||
http://www.orangepi.org/OrangePiOneplus/
|
||||
|
||||
Wiki link:
|
||||
https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+One+Plus
|
||||
|
||||
This configuration uses U-Boot mainline and kernel mainline.
|
||||
|
||||
How to build
|
||||
============
|
||||
|
||||
$ make orangepi_one_plus_defconfig
|
||||
$ make
|
||||
|
||||
Note: you will need access to the internet to download the required
|
||||
sources.
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
$ sudo sync
|
||||
|
||||
Insert the micro SDcard in your Orangepi One Plus and power it up. The console
|
||||
is on the serial line, 115200 8N1.
|
||||
@@ -0,0 +1,8 @@
|
||||
setenv fdt_high ffffffff
|
||||
|
||||
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
|
||||
|
||||
fatload mmc 0 $kernel_addr_r zImage
|
||||
fatload mmc 0 $fdt_addr_r sun8i-h3-orangepi-one.dtb
|
||||
|
||||
bootz $kernel_addr_r - $fdt_addr_r
|
||||
@@ -0,0 +1,37 @@
|
||||
# Minimal SD card image for the OrangePi PC
|
||||
#
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"zImage",
|
||||
"sun8i-h3-orangepi-one.dtb",
|
||||
"boot.scr"
|
||||
}
|
||||
}
|
||||
|
||||
size = 10M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot-sunxi-with-spl.bin"
|
||||
offset = 8K
|
||||
size = 1016K # 1MB - 8KB
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
size = 512M
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,29 @@
|
||||
OrangePi One
|
||||
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the OrangePi One. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
How to build it
|
||||
===============
|
||||
|
||||
Configure Buildroot:
|
||||
|
||||
$ make orangepi_one_defconfig
|
||||
|
||||
Compile everything and build the SD card image:
|
||||
|
||||
$ make
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
@@ -0,0 +1,8 @@
|
||||
setenv fdt_high ffffffff
|
||||
|
||||
setenv bootargs console=ttyS0,115200 earlyprintk root=PARTLABEL=rootfs rootwait
|
||||
|
||||
fatload mmc 0 $kernel_addr_r zImage
|
||||
fatload mmc 0 $fdt_addr_r sun8i-h3-orangepi-pc-plus.dtb
|
||||
|
||||
bootz $kernel_addr_r - $fdt_addr_r
|
||||
@@ -0,0 +1,43 @@
|
||||
# Minimal SD card image for the OrangePi PC Plus
|
||||
#
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"zImage",
|
||||
"sun8i-h3-orangepi-pc-plus.dtb",
|
||||
"boot.scr"
|
||||
}
|
||||
}
|
||||
|
||||
size = 10M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
# for root=PARTLABEL support
|
||||
gpt = true
|
||||
# default GPT location conflicts with bootloaders, move it after
|
||||
gpt-location = 1M
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot-sunxi-with-spl.bin"
|
||||
offset = 8K
|
||||
size = 1032K # 1MB - 8KB + 16KB(GPT)
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
# 'rootfs' will be used as the partition label, used
|
||||
# with root=PARTLABEL=rootfs kernel command line
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
size = 512M
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,8 @@
|
||||
# wireless core
|
||||
CONFIG_WIRELESS=y
|
||||
CONFIG_CFG80211=y
|
||||
CONFIG_MAC80211=y
|
||||
CONFIG_CFG80211_WEXT=y
|
||||
|
||||
# wireless drivers
|
||||
CONFIG_WLAN=y
|
||||
@@ -0,0 +1,29 @@
|
||||
OrangePi PC Plus
|
||||
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the OrangePi PC Plus. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
How to build it
|
||||
===============
|
||||
|
||||
Configure Buildroot:
|
||||
|
||||
$ make orangepi_pc_plus_defconfig
|
||||
|
||||
Compile everything and build the SD card image:
|
||||
|
||||
$ make
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
@@ -0,0 +1,8 @@
|
||||
setenv fdt_high ffffffff
|
||||
|
||||
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
|
||||
|
||||
fatload mmc 0 $kernel_addr_r zImage
|
||||
fatload mmc 0 $fdt_addr_r sun8i-h3-orangepi-pc.dtb
|
||||
|
||||
bootz $kernel_addr_r - $fdt_addr_r
|
||||
@@ -0,0 +1,37 @@
|
||||
# Minimal SD card image for the OrangePi PC
|
||||
#
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"zImage",
|
||||
"sun8i-h3-orangepi-pc.dtb",
|
||||
"boot.scr"
|
||||
}
|
||||
}
|
||||
|
||||
size = 10M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot-sunxi-with-spl.bin"
|
||||
offset = 8K
|
||||
size = 1016K # 1MB - 8KB
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
size = 512M
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,3 @@
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
|
||||
CONFIG_REGULATOR_SY8106A=y
|
||||
CONFIG_SUN8I_DE2_CCU=y
|
||||
@@ -0,0 +1,29 @@
|
||||
OrangePi PC
|
||||
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the OrangePi PC. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
How to build it
|
||||
===============
|
||||
|
||||
Configure Buildroot:
|
||||
|
||||
$ make orangepi_pc_defconfig
|
||||
|
||||
Compile everything and build the SD card image:
|
||||
|
||||
$ make
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
@@ -0,0 +1,6 @@
|
||||
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
|
||||
|
||||
fatload mmc 0 $kernel_addr_r Image
|
||||
fatload mmc 0 $fdt_addr_r sun50i-h5-orangepi-pc2.dtb
|
||||
|
||||
booti $kernel_addr_r - $fdt_addr_r
|
||||
@@ -0,0 +1,40 @@
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"Image",
|
||||
"sun50i-h5-orangepi-pc2.dtb",
|
||||
"boot.scr"
|
||||
}
|
||||
}
|
||||
|
||||
size = 64M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition spl {
|
||||
in-partition-table = "no"
|
||||
image = "sunxi-spl.bin"
|
||||
offset = 8K
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot.itb"
|
||||
offset = 40K
|
||||
size = 1M # 1MB - 40K
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,37 @@
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the Orangepi PC2. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
Orangepi PC2 link:
|
||||
http://www.orangepi.org/orangepipc2/
|
||||
|
||||
Wiki link:
|
||||
https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+PC2
|
||||
|
||||
This configuration uses U-Boot mainline and kernel mainline.
|
||||
|
||||
How to build
|
||||
============
|
||||
|
||||
$ make orangepi_pc2_defconfig
|
||||
$ make
|
||||
|
||||
Note: you will need access to the internet to download the required
|
||||
sources.
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
$ sudo sync
|
||||
|
||||
Insert the micro SDcard in your Orangepi PC2 and power it up. The console
|
||||
is on the serial line, 115200 8N1.
|
||||
@@ -0,0 +1,8 @@
|
||||
setenv fdt_high ffffffff
|
||||
|
||||
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
|
||||
|
||||
fatload mmc 0 $kernel_addr_r zImage
|
||||
fatload mmc 0 $fdt_addr_r sun8i-h3-orangepi-plus.dtb
|
||||
|
||||
bootz $kernel_addr_r - $fdt_addr_r
|
||||
@@ -0,0 +1,36 @@
|
||||
# Minimal SD card image for the OrangePi Plus\Plus2
|
||||
#
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"zImage",
|
||||
"sun8i-h3-orangepi-plus.dtb",
|
||||
"boot.scr"
|
||||
}
|
||||
}
|
||||
|
||||
size = 10M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot-sunxi-with-spl.bin"
|
||||
offset = 8K
|
||||
size = 1016K # 1MB - 8KB
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,29 @@
|
||||
OrangePi Plus/Plus2
|
||||
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the OrangePi Plus/Plus2. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
How to build it
|
||||
===============
|
||||
|
||||
Configure Buildroot:
|
||||
|
||||
$ make orangepi_plus_defconfig
|
||||
|
||||
Compile everything and build the SD card image:
|
||||
|
||||
$ make
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
@@ -0,0 +1,6 @@
|
||||
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
|
||||
|
||||
fatload mmc 0 $kernel_addr_r Image
|
||||
fatload mmc 0 $fdt_addr_r sun50i-h5-orangepi-prime.dtb
|
||||
|
||||
booti $kernel_addr_r - $fdt_addr_r
|
||||
@@ -0,0 +1,40 @@
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"Image",
|
||||
"sun50i-h5-orangepi-prime.dtb",
|
||||
"boot.scr"
|
||||
}
|
||||
}
|
||||
|
||||
size = 64M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition spl {
|
||||
in-partition-table = "no"
|
||||
image = "sunxi-spl.bin"
|
||||
offset = 8K
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot.itb"
|
||||
offset = 40K
|
||||
size = 1M # 1MB - 40KB
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,37 @@
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the Orangepi Prime. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
Orangepi Prime link:
|
||||
http://www.orangepi.org/OrangePiPrime/
|
||||
|
||||
Wiki link:
|
||||
https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Prime
|
||||
|
||||
This configuration uses U-Boot mainline and kernel mainline.
|
||||
|
||||
How to build
|
||||
============
|
||||
|
||||
$ make orangepi_prime_defconfig
|
||||
$ make
|
||||
|
||||
Note: you will need access to the internet to download the required
|
||||
sources.
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
$ sudo sync
|
||||
|
||||
Insert the micro SDcard in your Orangepi Prime and power it up. The console
|
||||
is on the serial line, 115200 8N1.
|
||||
@@ -0,0 +1,8 @@
|
||||
setenv fdt_high ffffffff
|
||||
|
||||
setenv bootargs console=ttyS0,115200 earlyprintk root=PARTLABEL=rootfs rootwait
|
||||
|
||||
fatload mmc 0 $kernel_addr_r zImage
|
||||
fatload mmc 0 $fdt_addr_r sun8i-h2-plus-orangepi-r1.dtb
|
||||
|
||||
bootz $kernel_addr_r - $fdt_addr_r
|
||||
@@ -0,0 +1,43 @@
|
||||
# Minimal SD card image for the OrangePi R1
|
||||
#
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"zImage",
|
||||
"sun8i-h2-plus-orangepi-r1.dtb",
|
||||
"boot.scr"
|
||||
}
|
||||
}
|
||||
|
||||
size = 10M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
# for root=PARTLABEL support
|
||||
gpt = true
|
||||
# default GPT location conflicts with spl, move it after
|
||||
gpt-location = 1M
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot-sunxi-with-spl.bin"
|
||||
offset = 8K
|
||||
size = 1032K # 1MB - 8KB + 16KB(GPT)
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
# 'rootfs' will be used as the partition label, used
|
||||
# with root=PARTLABEL=rootfs kernel command line
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
size = 512M
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,11 @@
|
||||
# spi nor
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_OF_PARTS=y
|
||||
CONFIG_MTD_SPI_NOR=y
|
||||
CONFIG_MTD_M25P80=y
|
||||
|
||||
# ondemand cpufreq governor
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
|
||||
|
||||
# USB ethernet
|
||||
CONFIG_USB_RTL8152=y
|
||||
@@ -0,0 +1,29 @@
|
||||
OrangePi R1
|
||||
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the OrangePi R1. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
How to build it
|
||||
===============
|
||||
|
||||
Configure Buildroot:
|
||||
|
||||
$ make orangepi_r1_defconfig
|
||||
|
||||
Compile everything and build the SD card image:
|
||||
|
||||
$ make
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
@@ -0,0 +1,4 @@
|
||||
label RK3399_ROCKPRO64 linux
|
||||
kernel /Image
|
||||
devicetree /rk3399-orangepi.dtb
|
||||
append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p4 rw rootwait
|
||||
@@ -0,0 +1,39 @@
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"Image",
|
||||
"rk3399-orangepi.dtb",
|
||||
"extlinux"
|
||||
}
|
||||
}
|
||||
|
||||
size = 64M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
gpt = true
|
||||
}
|
||||
|
||||
partition loader1 {
|
||||
image = "idbloader.img"
|
||||
offset = 32K
|
||||
}
|
||||
|
||||
partition loader2 {
|
||||
image = "u-boot.itb"
|
||||
offset = 8M
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
offset = 16M
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
}
|
||||
}
|
||||
Executable
+5
@@ -0,0 +1,5 @@
|
||||
#!/bin/sh
|
||||
|
||||
BOARD_DIR="$(dirname $0)"
|
||||
|
||||
install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
|
||||
@@ -0,0 +1,56 @@
|
||||
Orangepi Rk3399
|
||||
================
|
||||
http://www.orangepi.org/Orange%20Pi%20RK3399/
|
||||
|
||||
Build:
|
||||
======
|
||||
$ make orangepi_rk3399_defconfig
|
||||
$ make
|
||||
|
||||
Files created in output directory
|
||||
=================================
|
||||
|
||||
output/images
|
||||
|
||||
├── bl31.elf
|
||||
├── boot.vfat
|
||||
├── extlinux
|
||||
├── idbloader.img
|
||||
├── Image
|
||||
├── rk3399-orangepi.dtb
|
||||
├── rootfs.ext2
|
||||
├── rootfs.ext4 -> rootfs.ext2
|
||||
├── rootfs.tar
|
||||
├── sdcard.img
|
||||
├── u-boot.bin
|
||||
└── u-boot.itb
|
||||
|
||||
Creating bootable SD card:
|
||||
==========================
|
||||
|
||||
Simply invoke (as root)
|
||||
|
||||
sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
|
||||
|
||||
Where X is your SD card device.
|
||||
|
||||
Booting:
|
||||
========
|
||||
Orangepi-RK3399 by default boots from emmc. For SD card boot to
|
||||
happen, emmc should be empty. If emmc happens to have any bootable
|
||||
image then erase emmc so that bootrom will look for a proper image in SD.
|
||||
|
||||
emmc can be erased once after booted into linux as shown in below link.
|
||||
|
||||
https://wiki.amarulasolutions.com/bsp/setup/rockchip/rk3399_emmc.html
|
||||
|
||||
Serial console:
|
||||
---------------
|
||||
|
||||
Baudrate for this board is 1500000.
|
||||
|
||||
Login:
|
||||
------
|
||||
Enter 'root' as login user, and the prompt is ready.
|
||||
|
||||
https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/orangepi.html
|
||||
@@ -0,0 +1,6 @@
|
||||
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
|
||||
|
||||
fatload mmc 0 $kernel_addr_r Image
|
||||
fatload mmc 0 $fdt_addr_r sun50i-a64-orangepi-win.dtb
|
||||
|
||||
booti $kernel_addr_r - $fdt_addr_r
|
||||
@@ -0,0 +1,40 @@
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"Image",
|
||||
"sun50i-a64-orangepi-win.dtb",
|
||||
"boot.scr"
|
||||
}
|
||||
}
|
||||
|
||||
size = 64M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition spl {
|
||||
in-partition-table = "no"
|
||||
image = "sunxi-spl.bin"
|
||||
offset = 8K
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot.itb"
|
||||
offset = 40K
|
||||
size = 1M # 1MB - 40KB
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,37 @@
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the Orangepi Win/Win Plus. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
Orangepi Win/Win Plus link:
|
||||
http://www.orangepi.org/OrangePiWin_WinPlus/
|
||||
|
||||
Wiki link:
|
||||
https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Win
|
||||
|
||||
This configuration uses U-Boot mainline and kernel mainline.
|
||||
|
||||
How to build
|
||||
============
|
||||
|
||||
$ make orangepi_win_defconfig
|
||||
$ make
|
||||
|
||||
Note: you will need access to the internet to download the required
|
||||
sources.
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
$ sudo sync
|
||||
|
||||
Insert the micro SDcard in your Orangepi Win/Win Plus and power it up. The console
|
||||
is on the serial line, 115200 8N1.
|
||||
@@ -0,0 +1,6 @@
|
||||
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
|
||||
|
||||
fatload mmc 0 $kernel_addr_r Image
|
||||
fatload mmc 0 $fdt_addr_r sun50i-h5-orangepi-zero-plus.dtb
|
||||
|
||||
booti $kernel_addr_r - $fdt_addr_r
|
||||
@@ -0,0 +1,40 @@
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"Image",
|
||||
"sun50i-h5-orangepi-zero-plus.dtb",
|
||||
"boot.scr"
|
||||
}
|
||||
}
|
||||
|
||||
size = 64M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition spl {
|
||||
in-partition-table = "no"
|
||||
image = "sunxi-spl.bin"
|
||||
offset = 8K
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot.itb"
|
||||
offset = 40K
|
||||
size = 1M # 1MB - 40KB
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,34 @@
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the Orangepi Zero Plus. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
Orangepi Zero Plus link:
|
||||
http://www.orangepi.org/OrangePiZeroPlus/
|
||||
|
||||
This configuration uses U-Boot mainline and kernel mainline.
|
||||
|
||||
How to build
|
||||
============
|
||||
|
||||
$ make orangepi_zero_plus_defconfig
|
||||
$ make
|
||||
|
||||
Note: you will need access to the internet to download the required
|
||||
sources.
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
$ sudo sync
|
||||
|
||||
Insert the micro SDcard in your Orangepi Zero Plus and power it up. The console
|
||||
is on the serial line, 115200 8N1.
|
||||
@@ -0,0 +1,6 @@
|
||||
setenv bootargs console=ttyS0,115200 earlyprintk root=PARTLABEL=rootfs rootwait
|
||||
|
||||
fatload mmc 0 $kernel_addr_r Image
|
||||
fatload mmc 0 $fdt_addr_r sun50i-h5-orangepi-zero-plus2.dtb
|
||||
|
||||
booti $kernel_addr_r - $fdt_addr_r
|
||||
@@ -0,0 +1,41 @@
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"Image",
|
||||
"sun50i-h5-orangepi-zero-plus2.dtb",
|
||||
"boot.scr"
|
||||
}
|
||||
}
|
||||
|
||||
size = 64M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
# for root=PARTLABEL support
|
||||
gpt = true
|
||||
# default GPT location conflicts with bootloaders, move it after
|
||||
gpt-location = 1M
|
||||
}
|
||||
|
||||
partition spl {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot-sunxi-with-spl.bin"
|
||||
offset = 8K
|
||||
size = 1032K # 1MB - 8KB + 16KB(GPT)
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
# 'rootfs' will be used as the partition label, used
|
||||
# with root=PARTLABEL=rootfs kernel command line
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
size = 256M
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,10 @@
|
||||
# wireless core
|
||||
CONFIG_WIRELESS=y
|
||||
CONFIG_CFG80211=y
|
||||
CONFIG_MAC80211=y
|
||||
CONFIG_CFG80211_WEXT=y
|
||||
|
||||
# wireless drivers
|
||||
CONFIG_WLAN=y
|
||||
CONFIG_WLAN_VENDOR_BROADCOM=y
|
||||
CONFIG_BRCMFMAC=m
|
||||
@@ -0,0 +1,37 @@
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the Orangepi Zero Plus2. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
Orangepi Zero Plus2 link:
|
||||
http://www.orangepi.org/OrangePiZeroPlus2/
|
||||
|
||||
Wiki link:
|
||||
https://openedev.amarulasolutions.com/display/ODWIKI/Orangepi+Zero+Plus2
|
||||
|
||||
This configuration uses U-Boot mainline and kernel mainline.
|
||||
|
||||
How to build
|
||||
============
|
||||
|
||||
$ make orangepi_zero_plus2_defconfig
|
||||
$ make
|
||||
|
||||
Note: you will need access to the internet to download the required
|
||||
sources.
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
$ sudo sync
|
||||
|
||||
Insert the micro SDcard in your Orangepi Zero Plus2 and power it up. The console
|
||||
is on the serial line, 115200 8N1.
|
||||
+54
@@ -0,0 +1,54 @@
|
||||
#AP6212_NVRAM_V1.0_20140603
|
||||
# 2.4 GHz, 20 MHz BW mode
|
||||
|
||||
# The following parameter values are just placeholders, need to be updated.
|
||||
manfid=0x2d0
|
||||
prodid=0x0726
|
||||
vendid=0x14e4
|
||||
devid=0x43e2
|
||||
boardtype=0x0726
|
||||
boardrev=0x1101
|
||||
boardnum=22
|
||||
macaddr=00:90:4c:c5:12:38
|
||||
sromrev=11
|
||||
boardflags=0x00404201
|
||||
xtalfreq=26000
|
||||
nocrc=1
|
||||
ag0=255
|
||||
aa2g=1
|
||||
ccode=ALL
|
||||
|
||||
pa0itssit=0x20
|
||||
extpagain2g=0
|
||||
|
||||
#PA parameters for 2.4GHz, measured at CHIP OUTPUT
|
||||
pa2ga0=-168,7161,-820
|
||||
AvVmid_c0=0x0,0xc8
|
||||
cckpwroffset0=5
|
||||
|
||||
# PPR params
|
||||
maxp2ga0=90
|
||||
txpwrbckof=6
|
||||
cckbw202gpo=0x5555
|
||||
legofdmbw202gpo=0x77777777
|
||||
mcsbw202gpo=0xaaaaaaaa
|
||||
|
||||
# OFDM IIR :
|
||||
ofdmdigfilttype=7
|
||||
# PAPD mode:
|
||||
papdmode=2
|
||||
|
||||
il0macaddr=00:90:4c:c5:12:38
|
||||
wl0id=0x431b
|
||||
|
||||
#OOB parameters
|
||||
hostwake=0x40
|
||||
hostrdy=0x41
|
||||
usbrdy=0x03
|
||||
usbrdydelay=100
|
||||
deadman_to=0xffffffff
|
||||
# muxenab: 0x1 for UART enable, 0x10 for Host awake
|
||||
muxenab=0x10
|
||||
# CLDO PWM voltage settings - 0x4 - 1.1 volt
|
||||
#cldo_pwm=0x4
|
||||
|
||||
@@ -0,0 +1,8 @@
|
||||
setenv fdt_high ffffffff
|
||||
|
||||
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
|
||||
|
||||
fatload mmc 0 $kernel_addr_r zImage
|
||||
fatload mmc 0 $fdt_addr_r sun8i-h2-plus-orangepi-zero.dtb
|
||||
|
||||
bootz $kernel_addr_r - $fdt_addr_r
|
||||
@@ -0,0 +1,36 @@
|
||||
# Minimal SD card image for the OrangePi Zero
|
||||
#
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"zImage",
|
||||
"sun8i-h2-plus-orangepi-zero.dtb",
|
||||
"boot.scr"
|
||||
}
|
||||
}
|
||||
size = 10M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot-sunxi-with-spl.bin"
|
||||
offset = 8K
|
||||
size = 1016K # 1MB - 8KB
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
size = 512M
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,20 @@
|
||||
# spidev
|
||||
CONFIG_SPI_SPIDEV=y
|
||||
|
||||
# spi nor
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_OF_PARTS=y
|
||||
CONFIG_MTD_SPI_NOR=y
|
||||
CONFIG_MTD_M25P80=y
|
||||
|
||||
# wireless core
|
||||
CONFIG_WIRELESS=y
|
||||
CONFIG_CFG80211=y
|
||||
CONFIG_MAC80211=y
|
||||
CONFIG_CFG80211_WEXT=y
|
||||
|
||||
# wireless drivers
|
||||
CONFIG_WLAN=y
|
||||
|
||||
# ondemand cpufreq governor
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
|
||||
+35
@@ -0,0 +1,35 @@
|
||||
From 321faaf4b78d46a0c77782c1798856746f0619e9 Mon Sep 17 00:00:00 2001
|
||||
From: Sergey Matyukevich <geomatsi@gmail.com>
|
||||
Date: Fri, 19 May 2017 23:39:48 +0300
|
||||
Subject: [PATCH 1/3] ARM: dts: orange-pi-zero: specify XR819 WiFi chip
|
||||
interrupts
|
||||
|
||||
The orange-pi-zero board has Allwinner XR819 SDIO wifi chip. The board
|
||||
dts file provides a node enabling mmc1 controller. Together with an
|
||||
out-of-tree driver https://github.com/fifteenhex/xradio this node
|
||||
enables using the wifi chip.
|
||||
|
||||
This commit specifies XR819 interrupt configuration for the driver.
|
||||
|
||||
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
|
||||
---
|
||||
arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 3 +++
|
||||
1 file changed, 3 insertions(+)
|
||||
|
||||
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
|
||||
index b7ca916d871d..4e1a9050c6b4 100644
|
||||
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
|
||||
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
|
||||
@@ -125,6 +125,9 @@
|
||||
*/
|
||||
xr819: sdio_wifi@1 {
|
||||
reg = <1>;
|
||||
+ compatible = "xradio,xr819";
|
||||
+ interrupt-parent = <&pio>;
|
||||
+ interrupts = <6 10 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
};
|
||||
|
||||
--
|
||||
2.11.0
|
||||
|
||||
+42
@@ -0,0 +1,42 @@
|
||||
From 068c3baff3048a3db4ef2518ff917ce749cd8169 Mon Sep 17 00:00:00 2001
|
||||
From: Sergey Matyukevich <geomatsi@gmail.com>
|
||||
Date: Sat, 20 May 2017 11:24:26 +0300
|
||||
Subject: [PATCH 2/3] ARM: dts: orange-pi-zero: enable SPI NOR
|
||||
|
||||
Enable SPI NOR on orange-pi-zero board.
|
||||
|
||||
For more information see:
|
||||
- http://linux-sunxi.org/Orange_Pi_Zero#SPI_NOR_flash
|
||||
|
||||
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
|
||||
---
|
||||
arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 16 ++++++++++++++++
|
||||
1 file changed, 16 insertions(+)
|
||||
|
||||
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
|
||||
index 4e1a9050c6b4..cdf19821b1f3 100644
|
||||
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
|
||||
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
|
||||
@@ -161,3 +161,19 @@
|
||||
/* USB VBUS is always on */
|
||||
status = "okay";
|
||||
};
|
||||
+
|
||||
+&spi0 {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ flash@0 {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <1>;
|
||||
+ compatible = "mxicy,mx25l1606e", "winbond,w25q128";
|
||||
+ reg = <0>;
|
||||
+ spi-max-frequency = <40000000>;
|
||||
+
|
||||
+ partition@00000000 {
|
||||
+ reg = <0x00000000 0x200000>; /* 2Mb */
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
--
|
||||
2.11.0
|
||||
|
||||
+42
@@ -0,0 +1,42 @@
|
||||
From 8dd1b2a696bb7e9914abd11cc6f5c0f54c33d626 Mon Sep 17 00:00:00 2001
|
||||
From: Sergey Matyukevich <geomatsi@gmail.com>
|
||||
Date: Sat, 20 May 2017 15:36:51 +0300
|
||||
Subject: [PATCH 3/3] ARM: dts: orange-pi-zero: enable spidev
|
||||
|
||||
On orange-pi-zero board SPI1 pins are accessible via GPIO expansion port.
|
||||
This patch enables spidev driver for SPI1.
|
||||
|
||||
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
|
||||
---
|
||||
arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 11 +++++++++++
|
||||
1 file changed, 11 insertions(+)
|
||||
|
||||
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
|
||||
index cdf19821b1f3..7242aaecb14f 100644
|
||||
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
|
||||
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
|
||||
@@ -59,6 +59,7 @@
|
||||
serial0 = &uart0;
|
||||
/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
|
||||
ethernet1 = &xr819;
|
||||
+ spi1 = &spi1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
@@ -177,3 +178,13 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
+
|
||||
+&spi1 {
|
||||
+ status = "okay";
|
||||
+
|
||||
+ spidev@0 {
|
||||
+ compatible = "rohm,dh2228fv";
|
||||
+ reg = <0>;
|
||||
+ spi-max-frequency = <10000000>;
|
||||
+ };
|
||||
+};
|
||||
--
|
||||
2.11.0
|
||||
|
||||
@@ -0,0 +1,29 @@
|
||||
OrangePi Zero
|
||||
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the OrangePi Zero. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
How to build it
|
||||
===============
|
||||
|
||||
Configure Buildroot:
|
||||
|
||||
$ make orangepi_zero_defconfig
|
||||
|
||||
Compile everything and build the SD card image:
|
||||
|
||||
$ make
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
Reference in New Issue
Block a user