initial buildroot for linux 5.15

board/kontron/pitx-imx8m/boot.cmd

@@ -0,0 +1,8 @@
+echo "Root File Sytem on MMC${devnum}"
+setenv rootfs /dev/mmcblk${devnum}p1
+setenv bootargs root=${rootfs} rootwait rw ${extrabootargs}
+
+load ${devtype} ${devnum} ${kernel_addr_r} boot/Image
+load ${devtype} ${devnum} ${fdt_addr_r} boot/imx8mq-kontron-pitx-imx8m.dtb
+
+booti ${kernel_addr_r} - ${fdt_addr_r}

board/kontron/pitx-imx8m/genimage.cfg

@@ -0,0 +1,16 @@
+image sdcard.img {
+	hdimage {
+	}
+
+	partition imx-boot {
+		in-partition-table = "no"
+		image = "imx8-boot-sd.bin"
+		offset = 33k
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+		offset = 8M
+	}
+}

board/kontron/pitx-imx8m/post-build.sh

@@ -0,0 +1,4 @@
+#!/bin/sh
+
+mkdir -p $TARGET_DIR/boot/
+cp $BINARIES_DIR/boot.scr $TARGET_DIR/boot/boot.scr

board/kontron/pitx-imx8m/post-image.sh

@@ -0,0 +1,3 @@
+#!/bin/sh
+
+support/scripts/genimage.sh -c $(dirname $0)/genimage.cfg

board/kontron/pitx-imx8m/readme.txt

@@ -0,0 +1,74 @@
+Kontron pitx-imx8m
+==================
+
+https://www.kontron.com/produkte/pitx-imx8m/p155258
+
+
+How to build it
+===============
+
+Configure buildroot:
+
+  $ make kontron_pitx_imx8m_defconfig
+
+Change settings to fit your needs (optional):
+
+  $ make menuconfig
+
+Compile everything and buildr the rootfs image:
+
+  $ make
+
+
+Result of the build
+===================
+
+After building, the output/images directory contains:
+
+  output/images/
+    ├── bl31.bin
+    ├── boot.scr
+    ├── ddr_fw.bin
+    ├── Image
+    ├── imx8-boot-sd.bin
+    ├── imx8mq-kontron-pitx-imx8m.dtb
+    ├── lpddr4_pmu_train_fw.bin
+    ├── rootfs.ext2
+    ├── rootfs.ext4 -> rootfs.ext2
+    ├── rootfs.tar
+    ├── sdcard.img
+    ├── signed_hdmi_imx8m.bin
+    ├── u-boot.bin
+    ├── u-boot.itb
+    ├── u-boot-nodtb.bin
+    ├── u-boot-spl.bin
+    └── u-boot-spl-ddr.bin
+
+
+Flashing the SD card image
+==========================
+
+To install the image on a SDCard simply copy sdcard.img to the storage (e.g. SD, eMMC)
+
+  $ sudo dd if=output/images/sdcard.img of=<your-sd-device>
+
+
+Preparing the board
+===================
+
+ * Connect a serial line to the board
+ * Insert the SD card
+ * Make sure the boot source selection DIP switches are set correctly
+  * SW1 1-4 OFF
+  * SW1 2-3 OFF
+ * Power-up the board
+
+
+Booting the board
+=================
+
+By default the bootloader will search for the first valid image, starting
+with the internal eMMC. To make sure the bootloader loads bootscript from
+the correct location (SD card) set the boot_targets environment variable:
+
+  $ setenv boot_targets mmc1