initial buildroot for linux 5.15

board/beagleboardx15/genimage.cfg

@@ -0,0 +1,27 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"MLO",
+			"u-boot.img"
+		}
+	}
+
+	size = 4M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+		size = 512M
+	}
+}

board/beagleboardx15/readme.txt

@@ -0,0 +1,49 @@
+BeagleBoard X15
+
+Intro
+=====
+This config currently supports the beagleboard x15,
+and generates a barebone image.
+
+The image must be flashed to a SD card to be used.
+
+How to build it
+===============
+
+  $ make beagleboardx15_defconfig
+
+Then you can edit the build options using
+
+  $ make menuconfig
+
+Compile all and build a sdcard image:
+
+  $ make
+
+Result of the build
+-------------------
+
+After building, you should get a tree like this:
+
+  output/images/
+  +-- am57xx-beagle-x15.dtb
+  +-- am57xx-beagle-x15-revb1.dtb
+  +-- boot.vfat
+  +-- MLO
+  +--rootfs.ext2
+  +-- rootfs.ext4
+  +-- rootfs.tar
+  +-- sdcard.img
+  +-- u-boot.img
+  +-- u-boot-spl.bin
+  +-- zImage
+
+How to write the microSD card
+=============================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX