initial buildroot for linux 5.15
This commit is contained in:
Huan.Feng
@@ -0,0 +1,7 @@
|
||||
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
|
||||
|
||||
mmc dev 0
|
||||
fatload mmc 0 $kernel_addr_r zImage
|
||||
fatload mmc 0 $fdt_addr_r sun7i-a20-bananapi.dtb
|
||||
|
||||
bootz $kernel_addr_r - $fdt_addr_r
|
||||
@@ -0,0 +1,34 @@
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"zImage",
|
||||
"sun7i-a20-bananapi.dtb",
|
||||
"boot.scr"
|
||||
}
|
||||
}
|
||||
|
||||
size = 64M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot-sunxi-with-spl.bin"
|
||||
offset = 8K
|
||||
size = 1016K # 1MB - 8KB
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,37 @@
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the Bananapi M1. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
Bananapi M1 link:
|
||||
http://www.banana-pi.org/m1.html
|
||||
|
||||
Wiki link:
|
||||
https://openedev.amarulasolutions.com/display/ODWIKI/Bananapi+M1
|
||||
|
||||
This configuration uses U-Boot mainline and kernel mainline.
|
||||
|
||||
How to build
|
||||
============
|
||||
|
||||
$ make bananapi_m1_defconfig
|
||||
$ make
|
||||
|
||||
Note: you will need access to the internet to download the required
|
||||
sources.
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
$ sudo sync
|
||||
|
||||
Insert the micro SDcard in your Bananapi M1 and power it up. The console
|
||||
is on the serial line, 115200 8N1.
|
||||
@@ -0,0 +1,7 @@
|
||||
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
|
||||
|
||||
mmc dev 0
|
||||
fatload mmc 0 $kernel_addr_r zImage
|
||||
fatload mmc 0 $fdt_addr_r sun8i-r40-bananapi-m2-ultra.dtb
|
||||
|
||||
bootz $kernel_addr_r - $fdt_addr_r
|
||||
@@ -0,0 +1,34 @@
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"zImage",
|
||||
"sun8i-r40-bananapi-m2-ultra.dtb",
|
||||
"boot.scr"
|
||||
}
|
||||
}
|
||||
|
||||
size = 64M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot-sunxi-with-spl.bin"
|
||||
offset = 8K
|
||||
size = 1016K # 1MB - 8KB
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,35 @@
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the Bananapi M2 ULtra. With the current
|
||||
configuration it will bring-up the board, and allow access through the
|
||||
serial console.
|
||||
|
||||
Bananapi M2 Ultra link:
|
||||
http://www.banana-pi.org/m2u.html
|
||||
|
||||
This configuration uses U-Boot mainline and kernel mainline.
|
||||
|
||||
How to build
|
||||
============
|
||||
|
||||
$ make bananapi_m2_ultra_defconfig
|
||||
$ make
|
||||
|
||||
Note: you will need access to the internet to download the required
|
||||
sources.
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
$ sudo sync
|
||||
|
||||
Insert the micro SDcard in your Bananapi M2 Ultra and power it up. The console
|
||||
is on the serial line, 115200 8N1.
|
||||
@@ -0,0 +1,7 @@
|
||||
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
|
||||
|
||||
mmc dev 0
|
||||
fatload mmc 0 $kernel_addr_r zImage
|
||||
fatload mmc 0 $fdt_addr_r sun8i-h2-plus-bananapi-m2-zero.dtb
|
||||
|
||||
bootz $kernel_addr_r - $fdt_addr_r
|
||||
@@ -0,0 +1,34 @@
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"zImage",
|
||||
"sun8i-h2-plus-bananapi-m2-zero.dtb",
|
||||
"boot.scr"
|
||||
}
|
||||
}
|
||||
|
||||
size = 64M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot-sunxi-with-spl.bin"
|
||||
offset = 8K
|
||||
size = 1016K # 1MB - 8KB
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,34 @@
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
Buildroot environment for the Bananapi M2 Zero. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
Bananapi M2 Zero link:
|
||||
http://www.banana-pi.org/m2z.html
|
||||
|
||||
This configuration uses U-Boot mainline and kernel mainline.
|
||||
|
||||
How to build
|
||||
============
|
||||
|
||||
$ make bananapi_m2_zero_defconfig
|
||||
$ make
|
||||
|
||||
Note: you will need access to the internet to download the required
|
||||
sources.
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
$ sync
|
||||
|
||||
Insert the micro SDcard in your Bananapi M2 Zero and power it up. The console
|
||||
is on the Debug UART on the CON3 header, with serial settings 115200 8N1.
|
||||
@@ -0,0 +1,6 @@
|
||||
setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
|
||||
|
||||
fatload mmc 0 $kernel_addr_r Image
|
||||
fatload mmc 0 $fdt_addr_r sun50i-a64-bananapi-m64.dtb
|
||||
|
||||
booti $kernel_addr_r - $fdt_addr_r
|
||||
@@ -0,0 +1,40 @@
|
||||
image boot.vfat {
|
||||
vfat {
|
||||
files = {
|
||||
"Image",
|
||||
"sun50i-a64-bananapi-m64.dtb",
|
||||
"boot.scr"
|
||||
}
|
||||
}
|
||||
|
||||
size = 64M
|
||||
}
|
||||
|
||||
image sdcard.img {
|
||||
hdimage {
|
||||
}
|
||||
|
||||
partition spl {
|
||||
in-partition-table = "no"
|
||||
image = "sunxi-spl.bin"
|
||||
offset = 8K
|
||||
}
|
||||
|
||||
partition u-boot {
|
||||
in-partition-table = "no"
|
||||
image = "u-boot.itb"
|
||||
offset = 40K
|
||||
size = 1M # 1MB - 40KB
|
||||
}
|
||||
|
||||
partition boot {
|
||||
partition-type = 0xC
|
||||
bootable = "true"
|
||||
image = "boot.vfat"
|
||||
}
|
||||
|
||||
partition rootfs {
|
||||
partition-type = 0x83
|
||||
image = "rootfs.ext4"
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,37 @@
|
||||
Intro
|
||||
=====
|
||||
|
||||
This default configuration will allow you to start experimenting with the
|
||||
buildroot environment for the Bananapi M64. With the current configuration
|
||||
it will bring-up the board, and allow access through the serial console.
|
||||
|
||||
Bananapi M64 link:
|
||||
http://www.banana-pi.org/m64.html
|
||||
|
||||
Wiki link:
|
||||
https://openedev.amarulasolutions.com/display/ODWIKI/Bananapi+M64
|
||||
|
||||
This configuration uses U-Boot mainline and kernel mainline.
|
||||
|
||||
How to build
|
||||
============
|
||||
|
||||
$ make bananapi_m64_defconfig
|
||||
$ make
|
||||
|
||||
Note: you will need access to the internet to download the required
|
||||
sources.
|
||||
|
||||
How to write the SD card
|
||||
========================
|
||||
|
||||
Once the build process is finished you will have an image called "sdcard.img"
|
||||
in the output/images/ directory.
|
||||
|
||||
Copy the bootable "sdcard.img" onto an SD card with "dd":
|
||||
|
||||
$ sudo dd if=output/images/sdcard.img of=/dev/sdX
|
||||
$ sudo sync
|
||||
|
||||
Insert the micro SDcard in your Bananapi M64 and power it up. The console
|
||||
is on the serial line, 115200 8N1.
|
||||
Reference in New Issue
Block a user